Service overview and network port requirements for the Windows Server system (832017)

SUMMARY

This article discusses the essential network ports, protocols and services that are used by Microsoft client and server operating systems, server-based programs and their subcomponents in the Microsoft Windows server system. Administrators and support professionals may use this Microsoft Knowledge Base article as a road-map to determine what ports and protocols Microsoft operating systems and programs require for network connectivity in a segmented network.

The port information in this article should not be used to configure Windows Firewall. For information about configuring Windows Firewall, see the Windows Firewall Settings Technical Reference.

The Windows server system includes a comprehensive and integrated infrastructure that is designed to meet the requirements of developers and of information technology (IT) professionals. This system is designed to run programs and solutions that information workers can use to obtain, to analyze, and to share information quickly and easily. These Microsoft client, server and server program products use a variety of network ports and protocols to communicate with client systems and with other server systems over the network. Dedicated firewalls, host-based firewalls, and Internet Protocol security (IPsec) filters are other important components that are required to help secure your network. However, if these technologies are configured to block ports and protocols that are used by a specific server, that server will no longer respond to client requests.

Overview

The following list provides an overview of the information that this article contains:

• The "System services ports" section of this article contains a brief description of each service, displays the logical name of that service, and indicates the ports and protocols that each service requires for correct operation. Use this section to help identify the ports and protocols that a particular service uses.
• The "Ports and protocols" section of this article includes a table that summarizes the information from the "System Services Ports" section. The table is sorted by port number instead of by the service name. Use this section to quickly determine which services listen on a particular port.

This article uses certain terms in specific ways. To help avoid confusion, make sure that you understand how this document uses these terms. The following list describes these terms:

• System services: The Windows server system includes many products, such as the Microsoft Windows 2000 Server family, Microsoft Windows Server 2003 family, Microsoft Exchange 2000 Server, and Microsoft SQL Server 2000. Each of these products include many components; system services is one of those components. System services that are required by a particular computer are either started automatically by the operating system during startup or are started as required during typical operations. For example, some system services that are available on computers that are running Windows Server 2003, Enterprise Edition, include the Server service, the Print Spooler service, and the World Wide Web Publishing Service. Each system service has a friendly service name and a service name. The friendly service name is the name that appears in graphical management tools such as the Services Microsoft Management Console (MMC) snap-in. The service name is the name that is used with command-line tools and with many scripting languages. Each system service may provide one or more network services.
• Application protocol: In the context of this article, an application protocol is a high-level network protocol that uses one or more TCP/IP protocols and ports. Examples of application protocols include Hypertext Transfer Protocol (HTTP), server message blocks (SMBs), and Simple Mail Transfer Protocol (SMTP).
• Protocol: Operating at a lower level than the application protocols, TCP/IP protocols are standard formats for communicating between devices on a network. The TCP/IP suite of protocols includes TCP, User Datagram Protocol (UDP), and Internet Control Message Protocol (ICMP).
• Port: This is the network port that the system service listens on for incoming network traffic.

This article does not specify which services rely on other services for network communication. For example, many services rely on the remote procedure call (RPC) or DCOM features in Microsoft Windows to assign them dynamic TCP ports. The Remote Procedure Call service coordinates requests by other system services that use RPC or DCOM to communicate with client computers. Many other services rely on network basic input/output system (NetBIOS) or SMBs, protocols that are actually provided by the Server service. Others rely on HTTP or on Hypertext Transfer Protocol Secure (HTTPS). These protocols are provided by Internet Information Services (IIS). A full discussion of the architecture of the Windows operating systems is beyond the scope of this article. However, detailed documentation on this subject is available on Microsoft TechNet and on the Microsoft Developer Network (MSDN). While many services may rely on a particular TCP or UDP port, only a single service or process can be actively listening on that port at any one time.

When you use RPC with TCP/IP or with UDP/IP as the transport, inbound ports are frequently dynamically assigned to system services as required; TCP/IP and UDP/IP ports that are higher than port 1024 are used. These are frequently informally referred to as "random RPC ports." In these cases, RPC clients rely on the RPC endpoint mapper to tell them which dynamic port(s) were assigned to the server. For some RPC-based services, you can configure a specific port instead of letting RPC assign one dynamically. You can also restrict the range of ports that RPC dynamically assigns to a small range, regardless of the service. For more information about this topic, see the "References" section of this article.

This article includes information about the system services roles and the server roles for the Microsoft products that are listed in the "Applies to" section at the end of this article. While this information may also apply to Microsoft Windows XP and to Microsoft Windows 2000 Professional, this article is intended to focus on server-class operating systems. Because of this, this article describes the ports that a service listens on instead of the ports that client programs use to connect to a remote system.

System services ports

This section provides a description of each system service, includes the logical name that corresponds to the system service, and displays the ports and the protocols that each service requires.

Active Directory (Local Security Authority)

Active Directory runs under the LSASS process and includes the authentication and replication engines for Windows 2000 and Windows Server 2003 domain controllers. Domain controllers, client computers and application servers require network connectivity to Active Directory over specific hard-coded ports in addition to a range of ephmeral TCP ports between 1024 and 65536 unless a tunneling protocol is used to encapsulate such traffic, An encapsulated solution might consist of a VPN gateway located behind a filtering router using Layer 2 Tunneling Protocol (L2TP) together with IPsec. In this encapsulated scenario, you must allow IPsec Encapsulating Security Protocol (ESP) (IP protocol 50), IPsec Network Address Translator Traversal NAT-T (UDP port 4500), and IPsec Internet Security Association and Key Management Protocol (ISAKMP) (UDP port 500) through the router as opposed to opening all the ports and protocols listed below. Finally, the port used for Active Directory replication may be hard-coded as described in 224196: Restricting Active Directory replication traffic to a specific port.

Note Packet filters for L2TP traffic are not required, because L2TP is protected by IPsec ESP.

System service name: LSASS

Application protocol	Protocol	Ports
Global Catalog Server	TCP	3269
Global Catalog Server	TCP	3268
LDAP Server	TCP	389
LDAP Server	UDP	389
LDAP SSL	TCP	636
LDAP SSL	UDP	636
IPsec ISAKMP	UDP	500
NAT-T	UDP	4500
RPC	TCP	135
RPC randomly allocated high TCP ports	TCP	1024 - 65536

Application Layer Gateway Service

This subcomponent of the Internet Connection Sharing (ICS)/Internet Connection Firewall (ICF) service provides support for plug-ins that allow network protocols to pass through the firewall and work behind Internet Connection Sharing. Application Layer Gateway (ALG) plug-ins can open ports and change data (such as ports and IP addresses) that are embedded in packets. File Transfer Protocol (FTP) is the only network protocol with a plug-in that is included with Windows Server 2003, Standard Edition, and Windows Server 2003, Enterprise Edition. The ALG FTP plug-in is designed to support active FTP sessions through the network address translation (NAT) engine that these components use. The ALG FTP plug-in supports these sessions by redirecting all traffic that passes through the NAT and that is destined for port 21 to a private listening port in the range of 3000 to 5000 on the loopback adapter. The ALG FTP plug-in then monitors and updates FTP control channel traffic so that the FTP plug-in can forward port mappings through the NAT for the FTP data channels. The FTP plug-in also updates ports in the FTP control channel stream.

System service name: ALG

Application protocol	Protocol	Ports
FTP control	TCP	21

ASP.NET State Service

ASP.NET State Service provides support for ASP.NET out-of-process session states. ASP.NET State Service stores session data out-of-process. The service uses sockets to communicate with ASP.NET that is running on a Web server.

System service name: aspnet_state

Application protocol	Protocol	Ports
ASP.NET Session State	TCP	42424

Certificate Services

Certificate Services is part of the core operating system. By using Certificate Services, a business can act as its own certification authority (CA). In this way, the business can issue and manage digital certificates for programs and protocols such as Secure/Multipurpose Internet Mail Extensions (S/MIME), Secure Sockets Layer (SSL), Encrypting File System (EFS), IPsec, and smart card logon. Certificate Services relies on RPC and on DCOM to communicate with clients by using random TCP ports that are higher than port 1024.

System service name: CertSvc

Application protocol	Protocol	Ports
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

Cluster Service

The Cluster service controls server cluster operations and manages the cluster database. A cluster is a collection of independent computers that act as a single computer. Managers, programmers, and users see the cluster as a single system. The software distributes data among the nodes of the cluster. If a node fails, other nodes provide the services and data that was formerly provided by the missing node. When a node is added or repaired, the cluster software migrates some data to that node.

System service name: ClusSvc

Application protocol	Protocol	Ports
Cluster Services	UDP	3343
RPC	TCP	135
Cluster Administrator	UDP	137
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

Computer Browser

The Computer Browser system service maintains an up-to-date list of computers on your network and supplies the list to programs that request it. The Computer Browser service is used by Windows-based computers to view network domains and resources. Computers that are designated as browsers maintain browse lists that contain all shared resources that are used on the network. Earlier versions of Windows programs, such as My Network Places, the net view command, and Windows Explorer, all require browsing capability. For example, when you open My Network Places on a computer that is running Microsoft Windows 95, a list of domains and computers appears. To display this list, the computer obtains a copy of the browse list from a computer that is designated as a browser.

System service name: Browser

Application protocol	Protocol	Ports
NetBIOS Datagram Service	UDP	138
NetBIOS Name Resolution	UDP	137
NetBIOS Session Service	TCP	139

DHCP Server

The DHCP Server service uses the Dynamic Host Configuration Protocol (DHCP) to automatically allocate IP addresses. By using this service, you can adjust the advanced network settings of DHCP clients. For example, you can configure network settings such as Domain Name System (DNS) servers and Windows Internet Name Service (WINS) servers. You can establish one or more DHCP servers to maintain TCP/IP configuration information and to provide that information to client computers.

System service name: DHCPServer

Application protocol	Protocol	Ports
DHCP Server	UDP	67
MADCAP	UDP	2535

Distributed File System

The Distributed File System (DFS) integrates disparate file shares that are located across a local area network (LAN) or wide area network (WAN) into a single logical namespace. The DFS service is required for Active Directory domain controllers to advertise the SYSVOL shared folder.

System service name: Dfs

Application protocol	Protocol	Ports
NetBIOS Datagram Service	UDP	138
NetBIOS Session Service	TCP	139
LDAP Server	TCP	389
LDAP Server	UDP	389
SMB	TCP	445
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

Distributed File System Replication

The Distributed File System Replication (DFSR) service is a state-based, multi-master file replication engine that automatically copies updates to files and folders between computers that are participating in a common replication group. DFSR was added in Windows Server 2003 R2. DFSR can be configured by using the DFS Management tool to replicate files between Windows Server 2003 R2 computers, regardless of whether they are participating in Distributed File System Namespaces (DFSN) or not. DFSR is not used for SYSVOL replication.

System service name: DFSR

Application protocol	Protocol	Ports
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

Distributed Link Tracking Server

The Distributed Link Tracking Server system service stores information so that files that are moved between volumes can be tracked to each volume in the domain. The Distributed Link Tracking Server service runs on each domain controller in a domain. This service enables the Distributed Link Tracking Client service to track linked documents that have been moved to a location in another NTFS file system volume in the same domain.

System service name: TrkSvr

Application protocol	Protocol	Ports
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

Distributed Transaction Coordinator

The Distributed Transaction Coordinator (DTC) system service is responsible for coordinating transactions that are distributed across multiple computer systems and resource managers, such as databases, message queues, file systems, or other transaction-protected resource managers. The DTC system service is required if transactional components are configured through COM+. It is also required for transactional queues in Message Queuing (also known as MSMQ) and SQL Server operations that span multiple systems.

System service name: MSDTC

Application protocol	Protocol	Ports
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

DNS Server

The DNS Server service enables DNS name resolution by answering queries and update requests for DNS names. DNS servers are required to locate devices and services that are identified by using DNS names and to locate domain controllers in Active Directory.

System service name: DNS

Application protocol	Protocol	Ports
DNS	UDP	53
DNS	TCP	53

Event Log

The Event Log system service logs event messages that are generated by programs and by the Windows operating system. Event Log reports contain information that can be useful in diagnosing problems. Reports are viewed in Event Viewer. The Event Log service writes events that are sent by programs, by services, and by the operating system to log files. The events contain diagnostic information in addition to errors that are specific to the source program, the service, or the component. The logs can be viewed programmatically through the event log APIs or through the Event Viewer in an MMC snap-in.

System service name: Eventlog

Application protocol	Protocol	Ports
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

Microsoft Exchange Server and Outlook clients

Versions of Microsoft Exchange Server and Exchange clients have various port and protocol requirements. These requirements depend upon which version of Exchange Server or Exchange client is in use.

For Outlook clients to connect to versions of Exchange prior to Exchange 2003, direct RPC connectivity to the Exchange server is required. RPC connections made from Outlook to the Exchange server will first contact the RPC endpoint mapper (Port TCP 135) to request information on the port mappings of the various endpoints required. The Outlook client then tries to make connections to the Exchange server directly by using these endpoint ports.

Exchange 5.5 uses two ports for client communication. One port is for the Information Store, and one port is for the Directory. Exchange 2000 and 2003 use three ports for client communication. One port is for the Information Store, one is for Directory Referral (RFR), and one port is for DSProxy/NSPI.

In most cases, these two or three ports will be mapped randomly into the range TCP 1024-65534. If required, these ports can be configured to always bind to a static port mapping rather than to use the ephemeral ports.

For more information about how to configure static TCP/IP ports in Exchange Server, click the following article number to view the article in the Microsoft Knowledge Base: Outlook 2003 clients support direct connectivity to Exchange servers by using RPC. However, these clients can also communicate with Exchange 2003 servers that are hosted on Windows Server 2003-based computers on the Internet. The use of RPC over HTTP communication between Outlook and Exchange server eliminates the need to expose unauthenticated RPC traffic across the Internet. Instead, traffic between the Outlook 2003 client and the Exchange Server 2003 computer is tunneled within HTTPS packets over TCP port 443 (HTTPS).

RPC over HTTPS requires that port TCP 443 (HTTPS) be available between the Outlook 2003 client and the server that is functioning as the "RPCProxy" device. The HTTPS packets are terminated at the RPCProxy server and the unwrapped RPC packets are then passed to the Exchange server on three ports, in similar fashion to the direct RPC traffic described above. These RPC over HTTPS ports on the Exchange server are statically mapped to TCP 6001 (the Information Store), TCP 6002 (Directory Referral), and TCP 6004 (DSProxy/NSPI). No endpoint mapper must be exposed when using RPC over HTTPS communication between Outlook 2003 and Exchange 2003, since Outlook 2003 knows to use these statically mapped endpoint ports. In addition, no global catalog needs to be exposed to the Outlook 2003 client because the DSProxy/NSPI interface on the Exchange 2003 server will provide this functionality.

There may be additional items to consider for your specific environment. For further information and for help planning an Exchange implementation, visit the following Microsoft Web site: For more information, click the following article numbers to view the articles in the Microsoft Knowledge Base: Exchange Server can also provide support for other protocols, such as SMTP, Post Office Protocol 3 (POP3), and IMAP.

Application protocol	Protocol	Ports
IMAP	TCP	143
IMAP over SSL	TCP	993
POP3	TCP	110
POP3 over SSL	TCP	995
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534
RPC	TCP	135
RPC over HTTPS	TCP	443
SMTP	TCP	25
SMTP	UDP	25
Information Store	TCP	6001
Directory Referral	TCP	6002
DSProxy/NSPI	TCP	6004

Fax Service

Fax Service, a Telephony API (TAPI)-compliant system service, provides fax capabilities. By using Fax Service, users can send and receive faxes from their desktop programs by using either a local fax device or a shared network fax device.

System service name: Fax

Application protocol	Protocol	Ports
NetBIOS Session Service	TCP	139
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534
SMB	TCP	445

File Replication

The File Replication service (FRS) is a file-based replication engine that automatically copies updates to files and folders between computers that are participating in a common FRS replica set. FRS is the default replication engine that is used to replicate the contents of the SYSVOL folder between Windows 2000-based and Windows Server 2003-based domain controllers that are located in a common domain. FRS may be configured to replicate files and folders between targets of a DFS root or link by using the DFS Administration tool.

System service name: NtFrs

Application protocol	Protocol	Ports
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

File Server for Macintosh

By using the File Server for Macintosh system service, Macintosh computer users can store and access files on a computer that is running Windows Server 2003. If this service is turned off or blocked, Macintosh clients cannot access or store files on that computer.

System service name: MacFile

Application protocol	Protocol	Ports
File Server for Macintosh	TCP	548

FTP Publishing Service

FTP Publishing Service provides FTP connectivity. By default, the FTP control port is 21. However, you can configure this system service through the Internet Information Services (IIS) Manager snap-in. The default data (that is used for active mode FTP) port is automatically set to one port less than the control port. Therefore, if you configure the control port to port 4131, the default data port is port 4130. Most FTP clients use passive mode FTP. This means that the client initially connects to the FTP server by using the control port, the FTP server assigns a high TCP port between ports 1025 and 5000, and then the client opens a second connection to the FTP server for transferring data. You can configure the range of high ports by using the IIS metabase.

System service name: MSFTPSVC

Application protocol	Protocol	Ports
FTP control	TCP	21
FTP default data	TCP	20
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

Group Policy

To successfully apply Group Policy, a client must be able to contact a domain controller over the DCOM, ICMP, LDAP, SMB, and RPC protocols. If any one of these protocols are unavailable or blocked between the client and a relevant domain controller, policy will not apply or refresh. For a cross-domain logon, where a computer is in one domain, and the user account is in another, these protocols may be required for the client, the resource domain, and the account domain to communicate. ICMP is used for slow link detection. For more information about slow link detection, click the following article number to view the article in the Microsoft Knowledge Base: System service name: Group Policy

Application protocol	Protocol	Ports
DCOM	TCP + UDP	random port number between 1024 - 65534
ICMP (ping)	ICMP	20
LDAP	TCP	389
SMB	TCP	445
RPC	TCP	135, random port number between 1024 - 65534

HTTP SSL

The HTTP SSL system service enables IIS to perform SSL functions. SSL is an open standard for establishing an encrypted communications channel to help prevent the interception of critical information, such as credit card numbers. Although this service is designed to work on other Internet services, it is primarily used to enable encrypted electronic financial transactions on the World Wide Web (WWW). You can configure the ports for this service through the Internet Information Services (IIS) Manager snap-in.

System service name: HTTPFilter

Application protocol	Protocol	Ports
HTTPS	TCP	443

Internet Authentication Service

Internet Authentication Service (IAS) performs centralized authentication, authorization, auditing, and accounting of users who are connecting to a network. These users can be on a LAN connection or on a remote connection. IAS implements the Internet Engineering Task Force (IETF) standard Remote Authentication Dial-In User Service (RADIUS) protocol.

System service name: IAS

Application protocol	Protocol	Ports
Legacy RADIUS	UDP	1645
Legacy RADIUS	UDP	1646
RADIUS Accounting	UDP	1813
RADIUS Authentication	UDP	1812

Internet Connection Firewall (ICF)/Internet Connection Sharing (ICS)

This system service provides NAT, addressing, and name resolution services for all computers on your home network or your small-office network. When the Internet Connection Sharing feature is enabled, your computer becomes an "Internet gateway" on the network, and other client computers can then share one connection to the Internet, such as a dial-up connection or a broadband connection. This service provides basic DHCP and DNS services but will work with the full-featured Windows DHCP or DNS services. When ICF and Internet Connection Sharing act as a gateway for the rest of the computers on your network, they provide DHCP and DNS services to the private network on the internal network interface. They do not provide these services on the external-facing interface.

System service name: SharedAccess

Application protocol	Protocol	Ports
DHCP Server	UDP	67
DNS	UDP	53
DNS	TCP	53

Kerberos Key Distribution Center

When you use the Kerberos Key Distribution Center (KDC) system service, users can log on to the network by using the Kerberos version 5 authentication protocol. As in other implementations of the Kerberos protocol, the KDC is a single process that provides two services: the Authentication Service and the Ticket-Granting Service. The Authentication Service issues ticket granting tickets, and the Ticket-Granting Service issues tickets for connection to computers in its own domain.

System service name: kdc

Application protocol	Protocol	Ports
Kerberos	TCP	88
Kerberos	UDP	88

License Logging

The License Logging system service is a tool that was originally designed to help customers manage licenses for Microsoft server products that are licensed in the Server Client Access License (CAL) model. License Logging was introduced with Microsoft Windows NT Server 3.51. By default, the License Logging service is disabled in Windows Server 2003. Because of legacy design constraints and evolving license terms and conditions, License Logging may not provide an accurate view of the total number of CALs that are purchased compared to the total number of CALs that are used on a particular server or across the enterprise. The CALs that are reported by License Logging may conflict with the interpretation of the End-User License Agreement (EULA) and with Product Use Rights (PUR). License Logging will not be included in future versions of the Windows operating system. Microsoft recommends that only users of the Microsoft Small Business Server family of operating systems enable this service on their servers.

System service name: LicenseService

Application protocol	Protocol	Ports
NetBIOS Datagram Service	UDP	138
NetBIOS Session Service	TCP	139
SMB	TCP	445

Message Queuing

The Message Queuing system service is a messaging infrastructure and development tool for creating distributed messaging programs for Windows. These programs can communicate across heterogeneous networks and can send messages between computers that may be temporarily unable to connect to each other. Message Queuing helps provide security, efficient routing, support for sending messages within transactions, priority-based messaging, and guaranteed message delivery.

System service name: MSMQ

Application protocol	Protocol	Ports
MSMQ	TCP	1801
MSMQ	UDP	1801
MSMQ-DCs	TCP	2101
MSMQ-Mgmt	TCP	2107
MSMQ-Ping	UDP	3527
MSMQ-RPC	TCP	2105
MSMQ-RPC	TCP	2103
RPC	TCP	135

Messenger

The Messenger system service sends messages to or receives messages from users and computers, administrators, and the Alerter service. This service is not related to Windows Messenger. If you disable the Messenger service, notifications that are sent to computers or users who are currently logged on the network are not received. Additionally, the net send command and the net name command no longer function.

System service name: Messenger

Application protocol	Protocol	Ports
NetBIOS Datagram Service	UDP	138

Microsoft Exchange MTA Stacks

In Microsoft Exchange 2000 Server and Microsoft Exchange Server 2003, the Message Transfer Agent (MTA) is frequently used to provide backward-compatible message transfer services between Exchange 2000 Server-based servers and Exchange Server 5.5-based servers in a mixed-mode environment.

System service name: MSExchangeMTA

Application protocol	Protocol	Ports
X.400	TCP	102

Microsoft Operations Manager 2000

Microsoft Operations Manager (MOM) 2000 delivers enterprise-class operations management by providing comprehensive event management, proactive monitoring and alerting, reporting, and trend analysis. After you install MOM 2000 Service Pack 1 (SP1), MOM 2000 no longer uses a clear text communications channel, and all traffic between the MOM agent and the MOM server is encrypted over TCP port 1270. The MOM Administrator console uses DCOM to connect to the server. This means that administrators who manage the MOM server over the network must have access to random high TCP ports.

System service name: one point

Application protocol	Protocol	Ports
MOM-Clear	TCP	51515
MOM-Encrypted	TCP	1270

Microsoft POP3 Service

Microsoft POP3 Service provides e-mail transfer and retrieval services. Administrators can use this service to store and manage e-mail accounts on the mail server. When you install Microsoft POP3 Service on the mail server, users can connect to the mail server and can retrieve e-mail by using an e-mail client that supports the POP3 protocol, such as Microsoft Outlook.

System service name: POP3SVC

Application protocol	Protocol	Ports
POP3	TCP	110

MSSQLSERVER

MSSQLSERVER is a system service in Microsoft SQL Server 2000. SQL Server provides a powerful and comprehensive data management platform. You can configure the ports that each instance of SQL Server uses by using the Server Network Utility.

System service name: MSSQLSERVER

Application protocol	Protocol	Ports
SQL over TCP	TCP	1433
SQL Probe	UDP	1434

MSSQL$UDDI

The MSSQL$UDDI system service is installed during the installation of the Universal Description, Discovery, and Integration (UDDI) feature of the Windows Server 2003 family of operating systems. MSSQL$UDDI provides UDDI capabilities in an enterprise. The SQL Server database engine is the core component of MSSQL$UDDI.

System service name: MSSQLSERVER

Application protocol	Protocol	Ports
SQL over TCP	TCP	1433
SQL Probe	UDP	1434

Net Logon

The Net Logon system service maintains a security channel between your computer and the domain controller to authenticate users and services. It passes the user's credentials to a domain controller and returns the domain security identifiers and user rights for the user. This is typically referred to as pass-through authentication. Net Logon is configured to start automatically only when a member computer or domain controller is joined to a domain. In the Windows 2000 Server and Windows Server 2003 families, Net Logon publishes service resource locator records in the DNS. When this service runs, it relies on the Server service and on the Local Security Authority service to listen for incoming requests. On domain member computers, Net Logon uses RPC over named pipes. On domain controllers, it uses RPC over named pipes, RPC over TCP/IP, mailslots, and Lightweight Directory Access Protocol (LDAP).

System service name: Netlogon

Application protocol	Protocol	Ports
NetBIOS Datagram Service	UDP	138
NetBIOS Name Resolution	UDP	137
NetBIOS Session Service	TCP	139
SMB	TCP	445

NetMeeting Remote Desktop Sharing

The NetMeeting Remote Desktop Sharing system service allows authorized users to remotely access your Windows desktop from another personal computer over a corporate intranet by using Windows NetMeeting. You must explicitly enable this service in NetMeeting. You can disable or shut down this feature by using an icon in the Windows notification area.

System service name: mnmsrvc

Application protocol	Protocol	Ports
Terminal Services	TCP	3389

Network News Transfer Protocol (NNTP)

The Network News Transfer Protocol (NNTP) system service allows computers that are running Windows Server 2003 to act as news servers. Clients can use a news client, such as Microsoft Outlook Express, to retrieve newsgroups from the server and to read the headers or the bodies of the articles in each newsgroup.

System service name: NNTPSVC

Application protocol	Protocol	Ports
NNTP	TCP	119
NNTP over SSL	TCP	563

Performance Logs and Alerts

The Performance Logs and Alerts system service collects, based on preconfigured schedule parameters, performance data from local or remote computers and then writes that data to a log or triggers a message. Based on the information that is contained in the named log collection setting, the Performance Logs and Alerts service starts and stops each named performance data collection. This service only runs if at least one performance data collection is scheduled.

System service name: SysmonLog

Application protocol	Protocol	Ports
NetBIOS Session Service	TCP	139

Print Spooler

The Print Spooler system service manages all local and network print queues and controls all print jobs. Print Spooler is the center of the Windows printing subsystem. It manages the print queues on the system and communicates with printer drivers and input/output (I/O) components, such as the USB port and the TCP/IP protocol suite.

System service name: Spooler

Application protocol	Protocol	Ports
NetBIOS Session Service	TCP	139
SMB	TCP	445

Remote Installation

You can use the Remote Installation system service to install Windows 2000, Windows XP, and Windows Server 2003 on Pre-Boot eXecution Environment (PXE) remote boot-enabled client computers. The Boot Information Negotiation Layer (BINL) service, the primary component of Remote Installation Server (RIS), answers PXE client requests, checks Active Directory for client validation, and passes client information to and from the server. The BINL service is installed when you either add the RIS component from Add/Remove Windows Components, or select it when you initially install the operating system.

System service name: BINLSVC

Application protocol	Protocol	Ports
BINL	UDP	4011

Remote Procedure Call (RPC)

The Remote Procedure Call (RPC) system service is an interprocess communication (IPC) mechanism that enables data exchange and invocation of functionality that reside in a different process. The different process can be on the same computer, on the LAN, or in a remote location, and can be accessed over a WAN connection or over a VPN connection. The RPC service serves as the RPC endpoint mapper and Component Object Model (COM) Service Control Manager. Many services depend on the RPC service to start successfully.

System service name: RpcSs

Application protocol	Protocol	Ports
RPC	TCP	135
RPC over HTTPS	TCP	593

Remote Procedure Call (RPC) Locator

The Remote Procedure Call (RPC) Locator system service manages the RPC name service database. When this service is turned on, RPC clients can locate RPC servers. This service is turned off by default.

System service name: RpcLocator

Application protocol	Protocol	Ports
NetBIOS Session Service	TCP	139
SMB	TCP	445

Remote Storage Notification

The Remote Storage Notification system service notifies users when they read from or write to files that are only available from a secondary storage media. Stopping this service prevents this notification.

System service name: Remote_Storage_User_Link

Application protocol	Protocol	Ports
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

Remote Storage Server

The Remote Storage Server system service stores infrequently used files on a secondary storage medium. If you stop this service, users cannot move or retrieve files from the secondary storage media.

System service name: Remote_Storage_Server

Application protocol	Protocol	Ports
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

Routing and Remote Access

The Routing and Remote Access service provides multiprotocol LAN-to-LAN, LAN-to-WAN, VPN, and NAT routing services. Additionally, the Routing and Remote Access service also provides dial-up and VPN remote access services. Although Routing and Remote Access can use all the following protocols, the service typically uses only a subset of them. For example, if you configure a VPN gateway that lies behind a filtering router, you will probably use only one technology. If you use L2TP with IPsec, you must allow IPsec ESP (IP protocol 50), NAT-T (UDP on port 4500), and IPsec ISAKMP (UDP on port 500) through the router.

Note Although NAT-T and IPsec ISAKMP are required for L2TP, these ports are actually monitored by the Local Security Authority. For additional information about this, see the "References" section of this article.

System service name: RemoteAccess

Application protocol	Protocol	Ports
GRE (IP protocol 47)	GRE	n/a
IPsec AH (IP protocol 51)	AH	n/a
IPsec ESP (IP protocol 50)	ESP	n/a
L2TP	UDP	1701
PPTP	TCP	1723

Server

The Server system service provides RPC support and file, print, and named pipe sharing over the network. The Server service allows the sharing of local resources, such as disks and printers, so that other users on the network can access them. It also allows named pipe communication between programs that are running on the local computer and on other computers. Named pipe communication is memory that is reserved for the output of one process to be used as input for another process. The input-accepting process does not have to be local to the computer.

Note If a computer name resolves to multiple IP addresses using WINS, or if WINS failed and the name is resolved using DNS, NetBIOS over TCP/IP (NetBT) will try to ping the IP address or addresses of the file server. Port 139 communications depend on Internet Control Message Protocol (ICMP) echo messages. If Internet Protocol version 6 (IPv6) is not installed, port 445 communications will also depend on ICMP for name resolution. Preloaded Lmhosts entries will bypass the DNS resolver. If IPv6 is installed on Windows Server 2003-based or Windows XP-based systems, port 445 communications will not trigger any ICMP requests.

System service name: lanmanserver

Application protocol	Protocol	Ports
NetBIOS Datagram Service	UDP	138
NetBIOS Name Resolution	UDP	137
NetBIOS Session Service	TCP	139
SMB	TCP	445

SharePoint Portal Server

With the SharePoint Portal Server system service, you can develop an intelligent portal that seamlessly connects users, teams, and knowledge so that people can take advantage of relevant information across business processes. Microsoft SharePoint Portal Server 2003 provides an enterprise business solution that integrates information from various systems into one solution through single sign-on and enterprise application integration capabilities.

Application protocol	Protocol	Ports
HTTP	TCP	80
HTTPS	TCP	443

Simple Mail Transfer Protocol (SMTP)

The Simple Mail Transfer Protocol (SMTP) system service is an e-mail submission and relay agent. It accepts and queues e-mail for remote destinations, and it retries at specified intervals. Windows domain controllers use the SMTP service for intersite e-mail-based replication. The Collaboration Data Objects (CDO) for the Windows Server 2003 COM component can use the SMTP service to submit and to queue outbound e-mail.

System service name: SMTPSVC

Application protocol	Protocol	Ports
SMTP	TCP	25
SMTP	UDP	25

Simple TCP/IP Services

Simple TCP/IP Services implements support for the following protocols:

• Echo, port 7, RFC 862
• Discard, port 9, RFC 863
• Character Generator, port 19, RFC 864
• Daytime, port 13, RFC 867
• Quote of the Day, port 17, RFC 865

System service name: SimpTcp

Application protocol	Protocol	Ports
Chargen	TCP	19
Chargen	UDP	19
Daytime	TCP	13
Daytime	UDP	13
Discard	TCP	9
Discard	UDP	9
Echo	TCP	7
Echo	UDP	7
Quotd	TCP	17
Quoted	UDP	17

SMS Remote Control Agent

SMS Remote Control Agent is a system service in Microsoft Systems Management Server (SMS) 2003. SMS Remote Control Agent provides a comprehensive solution for change and for configuration management for the Microsoft operating systems. With this solution, organizations can provide relevant software and updates to users.

System service name: Wuser32

Application protocol	Protocol	Ports
SMS Remote Chat	TCP	2703
SMS Remote Chat	UDP	2703
SMS Remote Control (control)	TCP	2701
SMS Remote Control (control)	UDP	2701
SMS Remote Control (data)	TCP	2702
SMS Remote Control (data)	UDP	2702
SMS Remote File Transfer	TCP	2704
SMS Remote File Transfer	UDP	2704

SNMP Service

SNMP Service allows incoming Simple Network Management Protocol (SNMP) requests to be serviced by the local computer. SNMP Service includes agents that monitor activity in network devices and report to the network console workstation. SNMP Service provides a method of managing network hosts (such as workstation or server computers, routers, bridges, and hubs) from a centrally-located computer that is running network management software. SNMP performs management services by using a distributed architecture of management systems and agents.

System service name: SNMP

Application protocol	Protocol	Ports
SNMP	UDP	161

SNMP Trap Service

SNMP Trap Service receives trap messages that are generated by local or by remote SNMP agents and then forwards those messages to SNMP management programs that are running on your computer. SNMP Trap Service, when configured for an agent, generates trap messages if any specific events occur. These messages are sent to a trap destination. For example, an agent can be configured to initiate an authentication trap if an unrecognized management system sends a request for information. Trap destinations include the computer name, the IP address, or the Internetwork Packet Exchange (IPX) address of the management system. The trap destination must be a network-enabled host that is running SNMP management software.

System service name: SNMPTRAP

Application protocol	Protocol	Ports
SNMP Traps Outbound	UDP	162

SQL Analysis Server

The SQL Analysis Server system service is a component of SQL Server 2000. With SQL Analysis Server, you can create and manage OLAP cubes and data mining models. The analysis server may access local or remote data sources for creating and storing cubes or data mining models.

Application protocol	Protocol	Ports
SQL Analysis Services	TCP	2725

SQL Server: Downlevel OLAP Client Support

This system service is used by SQL Server 2000 when the SQL Analysis Server service has to support connections from downlevel (OLAP Services 7.0) clients. These are the default ports for OLAP services that are used by SQL 7.0.

Application protocol	Protocol	Ports
OLAP Services 7.0	TCP	2393
OLAP Services 7.0	TCP	2394

SSDP Discovery Service

SSDP Discovery Service implements Simple Service Discovery Protocol (SSDP) as a Windows service. SSDP Discovery Service manages receipt of device presence announcements, updates its cache, and passes these notifications along to clients with outstanding search requests. SSDP Discovery Service also accepts registration of event callbacks from clients, turns these into subscription requests, and monitors for event notifications. It then passes these requests along to the registered callbacks. This system service also provides hosted devices with periodic announcements. Currently, the SSDP event notification service uses TCP port 5000. Starting with the next Windows XP service pack, it will rely on TCP port 2869.

Note At the time of this writing, the current Windows XP service pack level is Windows XP Service Pack 1 (SP1).

System service name: SSDPRSR

Application protocol	Protocol	Ports
SSDP	UDP	1900
SSDP event notification	TCP	2869
SSDP legacy event notification	TCP	5000

Systems Management Server 2.0

Microsoft Systems Management Server (SMS) 2003 provides a comprehensive solution for change and configuration management for Microsoft operating systems. With this solution, organizations can provide relevant software and updates to users quickly and cost-effectively.

Application protocol	Protocol	Ports
NetBIOS Datagram Service	UDP	138
NetBIOS Name Resolution	UDP	137
NetBIOS Session Service	TCP	139
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

TCP/IP Print Server

The TCP/IP Print Server system service enables TCP/IP-based printing by using the Line Printer Daemon (LPD) protocol. The LPD service on the server receives documents from Line Printer Remote (LPR) utilities that are running on UNIX computers.

System service name: LPDSVC

Application protocol	Protocol	Ports
LPD	TCP	515

Telnet

The Telnet system service for Windows provides ASCII terminal sessions to Telnet clients. A Telnet server supports two types of authentication and supports the following four types of terminals: System service name: TlntSvr

Application protocol	Protocol	Ports
Telnet	TCP	23

Terminal Services

Terminal Services provides a multi-session environment that allows client devices to access a virtual Windows desktop session and Windows-based programs that are running on the server. Terminal Services allows multiple users to be connected interactively to a computer.

System service name: TermService

Application protocol	Protocol	Ports
Terminal Services	TCP	3389

Terminal Services Licensing

The Terminal Services Licensing system service installs a license server and provides licenses to registered clients when the clients connect to a terminal server (a server that has Terminal Server enabled). Terminal Services Licensing is a low-impact service that stores the client licenses that have been issued for a terminal server, and then tracks the licenses that have been issued to client computers or terminals.

System service name: TermServLicensing

Application protocol	Protocol	Ports
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534
SMB (named pipes)	TCP	139, 445

Terminal Services Session Directory

The Terminal Services Session Directory system service allows clusters of load-balanced terminal servers to correctly route a user's connection request to the server where the user already has a session running. Users are routed to the first-available terminal server, regardless of whether they are running another session in the server cluster. The load-balancing functionality pools the processing resources of several servers by using the TCP/IP networking protocol. You can use this service with a cluster of terminal servers to increase the performance of a single terminal server by distributing sessions across multiple servers. Terminal Services Session Directory keeps track of disconnected sessions on the cluster and makes sure that users are reconnected to those sessions.

System service name: Tssdis

Application protocol	Protocol	Ports
RPC	TCP	135
Randomly allocated high TCP ports	TCP	random port number between 1024 - 65534

Trivial FTP Daemon

The Trivial FTP Daemon system service does not require a user name or a password and is an integral part of the Remote Installation Services (RIS). The Trivial FTP Daemon service implements support for the Trivial FTP Protocol (TFTP) that is defined by the following RFCs:Trivial File Transfer Protocol (TFTP) is a file transfer protocol that is designed to support diskless boot environments. The TFTP service listens on UDP port 69 but responds from a randomly allocated high port. Therefore, enabling this port will let the TFTP service receive incoming TFTP requests, but will not let the selected server respond to those requests. The service is free to respond to any such request from any source port it wishes, and the remote client will then use that port for the duration of the transfer. Communication is bidirectional. If you need to enable this protocol through a firewall, it may be useful to open UDP port 69 inbound. You can then rely on other firewall features, which dynamically allow the service to respond through temporary holes on any other port.

System service name: tftpd

Application protocol	Protocol	Ports
TFTP	UDP	69

Universal Plug and Play Device Host

The Universal Plug and Play Host discovery system service implements all the components that are required for device registration, control, and the response to events for hosted devices. The information that is registered that pertains to a device (the description, the lifetimes, and the containers) are optionally stored to disk and are announced on the network after registration, or when the operating system restarts. The service also includes the Web server that serves the device, in addition to service descriptions and a presentation page.

System service name: UPNPHost

Application protocol	Protocol	Ports
UPNP	TCP	2869

Windows Internet Name Service (WINS)

Windows Internet Name Service (WINS) enables NetBIOS name resolution. This service helps you locate network resources by using NetBIOS names. WINS servers are required unless all domains have been upgraded to the Active Directory directory service and unless all computers on the network are running Windows 2000 or later. WINS servers communicate with network clients by using NetBIOS name resolution. WINS replication is only required between WINS servers.

System service name: WINS

Application protocol	Protocol	Ports
NetBIOS Name Resolution	UDP	137
WINS Replication	TCP	42
WINS Replication	UDP	42

Windows Media Services

Windows Media Services in Windows Server 2003 replaces the following four services that are included in Windows Media Services versions 4.0 and 4.1: Windows Media Services is now a single service that runs on Windows Server 2003, Standard Edition; Windows Server 2003, Enterprise Edition; and Windows Server 2003, Datacenter Edition. Its core components were developed by using the COM, and it has a flexible architecture that you can customize for specific programs. It supports a greater variety of control protocols, including Real Time Streaming Protocol (RTSP), Microsoft Media Server (MMS) protocol, and HTTP.

System service name: WMServer

Application protocol	Protocol	Ports
HTTP	TCP	80
MMS	TCP	1755
MMS	UDP	1755
MS Theater	UDP	2460
RTCP	UDP	5005
RTP	UDP	5004
RTSP	TCP	554

Windows Time

The Windows Time system service maintains date and time synchronization on all Windows XP and Windows Server 2003-based computers on a network. This service uses Network Time Protocol (NTP) to synchronize computer clocks so that an accurate clock value, or timestamp is assigned for network validation and for resource access requests. The implementation of NTP and the integration of time providers help make Windows Time a reliable and scalable time service for your enterprise. For computers that are not joined to a domain, you can configure Windows Time to synchronize time with an external time source. If this service is turned off, the time setting for local computers is not synchronized with a time service in the Windows domain or with an externally configured time service. Windows Server 2003 uses NTP. NTP runs on UDP port 123. The Windows 2000 version of this service uses Simple Network Time Protocol (SNTP). SNTP also runs on UDP port 123.

System service name: W32Time

Application protocol	Protocol	Ports
NTP	UDP	123
SNTP	UDP	123

World Wide Web Publishing Service

World Wide Web Publishing Service provides the infrastructure that is necessary to register, to manage, to monitor, and to serve Web sites and programs that are registered with IIS. This system service contains a process manager and a configuration manager. The process manager controls the processes where custom applications and Web sites reside. The configuration manager reads the stored system configuration for World Wide Web Publishing Service and makes sure that Http.sys is configured to route HTTP requests to the appropriate application pools or operating system processes. You can configure the ports that are used by this service through the Internet Information Services (IIS) Manager snap-in. If the administrative Web site is enabled, a virtual Web site is created that uses HTTP traffic on TCP port 8098.

System service name: W3SVC

Application protocol	Protocol	Ports
HTTP	TCP	80
HTTPS	TCP	443

Ports and protocols

The following table summarizes the information from the "System services ports" section of this article. This table is sorted by port number instead of by the service name.

Port	Protocol	Application protocol	System service name
n/a	GRE	GRE (IP protocol 47)	Routing and Remote Access
n/a	ESP	IPsec ESP (IP protocol 50)	Routing and Remote Access
n/a	AH	IPsec AH (IP protocol 51)	Routing and Remote Access
7	TCP	Echo	Simple TCP/IP Services
7	UDP	Echo	Simple TCP/IP Services
9	TCP	Discard	Simple TCP/IP Services
9	UDP	Discard	Simple TCP/IP Services
13	TCP	Daytime	Simple TCP/IP Services
13	UDP	Daytime	Simple TCP/IP Services
17	TCP	Quotd	Simple TCP/IP Services
17	UDP	Quotd	Simple TCP/IP Services
19	TCP	Chargen	Simple TCP/IP Services
19	UDP	Chargen	Simple TCP/IP Services
20	TCP	FTP default data	FTP Publishing Service
21	TCP	FTP control	FTP Publishing Service
21	TCP	FTP control	Application Layer Gateway Service
23	TCP	Telnet	Telnet
25	TCP	SMTP	Simple Mail Transfer Protocol
25	UDP	SMTP	Simple Mail Transfer Protocol
25	TCP	SMTP	Exchange Server
25	UDP	SMTP	Exchange Server
42	TCP	WINS Replication	Windows Internet Name Service
42	UDP	WINS Replication	Windows Internet Name Service
53	TCP	DNS	DNS Server
53	UDP	DNS	DNS Server
53	TCP	DNS	Internet Connection Firewall/Internet Connection Sharing
53	UDP	DNS	Internet Connection Firewall/Internet Connection Sharing
67	UDP	DHCP Server	DHCP Server
67	UDP	DHCP Server	Internet Connection Firewall/Internet Connection Sharing
69	UDP	TFTP	Trivial FTP Daemon Service
80	TCP	HTTP	Windows Media Services
80	TCP	HTTP	World Wide Web Publishing Service
80	TCP	HTTP	SharePoint Portal Server
88	TCP	Kerberos	Kerberos Key Distribution Center
88	UDP	Kerberos	Kerberos Key Distribution Center
102	TCP	X.400	Microsoft Exchange MTA Stacks
110	TCP	POP3	Microsoft POP3 Service
110	TCP	POP3	Exchange Server
119	TCP	NNTP	Network News Transfer Protocol
123	UDP	NTP	Windows Time
123	UDP	SNTP	Windows Time
135	TCP	RPC	Message Queuing
135	TCP	RPC	Remote Procedure Call
135	TCP	RPC	Exchange Server
135	TCP	RPC	Certificate Services
135	TCP	RPC	Cluster Service
135	TCP	RPC	Distributed File System
135	TCP	RPC	Distributed Link Tracking
135	TCP	RPC	Distributed Transaction Coordinator
135	TCP	RPC	Event Log
135	TCP	RPC	Fax Service
135	TCP	RPC	File Replication
135	TCP	RPC	Group Policy
135	TCP	RPC	Local Security Authority
135	TCP	RPC	Remote Storage Notification
135	TCP	RPC	Remote Storage Server
135	TCP	RPC	Systems Management Server 2.0
135	TCP	RPC	Terminal Services Licensing
135	TCP	RPC	Terminal Services Session Directory
137	UDP	NetBIOS Name Resolution	Computer Browser
137	UDP	NetBIOS Name Resolution	Server
137	UDP	NetBIOS Name Resolution	Windows Internet Name Service
137	UDP	NetBIOS Name Resolution	Net Logon
137	UDP	NetBIOS Name Resolution	Systems Management Server 2.0
138	UDP	NetBIOS Datagram Service	Computer Browser
138	UDP	NetBIOS Datagram Service	Messenger
138	UDP	NetBIOS Datagram Service	Server
138	UDP	NetBIOS Datagram Service	Net Logon
138	UDP	NetBIOS Datagram Service	Distributed File System
138	UDP	NetBIOS Datagram Service	Systems Management Server 2.0
138	UDP	NetBIOS Datagram Service	License Logging Service
139	TCP	NetBIOS Session Service	Computer Browser
139	TCP	NetBIOS Session Service	Fax Service
139	TCP	NetBIOS Session Service	Performance Logs and Alerts
139	TCP	NetBIOS Session Service	Print Spooler
139	TCP	NetBIOS Session Service	Server
139	TCP	NetBIOS Session Service	Net Logon
139	TCP	NetBIOS Session Service	Remote Procedure Call Locator
139	TCP	NetBIOS Session Service	Distributed File System
139	TCP	NetBIOS Session Service	Systems Management Server 2.0
139	TCP	NetBIOS Session Service	License Logging Service
143	TCP	IMAP	Exchange Server
161	UDP	SNMP	SNMP Service
162	UDP	SNMP Traps Outbound	SNMP Trap Service
389	TCP	LDAP Server	Local Security Authority
389	UDP	LDAP Server	Local Security Authority
389	TCP	LDAP Server	Distributed File System
389	UDP	LDAP Server	Distributed File System
443	TCP	HTTPS	HTTP SSL
443	TCP	HTTPS	World Wide Web Publishing Service
443	TCP	HTTPS	SharePoint Portal Server
443	TCP	RPC over HTTPS	Exchange Server 2003
445	TCP	SMB	Fax Service
445	TCP	SMB	Print Spooler
445	TCP	SMB	Server
445	TCP	SMB	Remote Procedure Call Locator
445	TCP	SMB	Distributed File System
445	TCP	SMB	License Logging Service
445	TCP	SMB	Net Logon
464	TCP	Kerberos Password V5	Net Logon
500	UDP	IPsec ISAKMP	Local Security Authority
515	TCP	LPD	TCP/IP Print Server
548	TCP	File Server for Macintosh	File Server for Macintosh
554	TCP	RTSP	Windows Media Services
563	TCP	NNTP over SSL	Network News Transfer Protocol
593	TCP	RPC over HTTPS endpoint mapper	Remote Procedure Call
593	TCP	RPC over HTTPS	Exchange Server
636	TCP	LDAP SSL	Local Security Authority
636	UDP	LDAP SSL	Local Security Authority
993	TCP	IMAP over SSL	Exchange Server
995	TCP	POP3 over SSL	Exchange Server
1067	TCP	Installation Bootstrap Service	Installation Bootstrap protocol server
1068	TCP	Installation Bootstrap Service	Installation Bootstrap protocol client
1270	TCP	MOM-Encrypted	Microsoft Operations Manager 2000
1433	TCP	SQL over TCP	Microsoft SQL Server
1433	TCP	SQL over TCP	MSSQL$UDDI
1434	UDP	SQL Probe	Microsoft SQL Server
1434	UDP	SQL Probe	MSSQL$UDDI
1645	UDP	Legacy RADIUS	Internet Authentication Service
1646	UDP	Legacy RADIUS	Internet Authentication Service
1701	UDP	L2TP	Routing and Remote Access
1723	TCP	PPTP	Routing and Remote Access
1755	TCP	MMS	Windows Media Services
1755	UDP	MMS	Windows Media Services
1801	TCP	MSMQ	Message Queuing
1801	UDP	MSMQ	Message Queuing
1812	UDP	RADIUS Authentication	Internet Authentication Service
1813	UDP	RADIUS Accounting	Internet Authentication Service
1900	UDP	SSDP	SSDP Discovery Service
2101	TCP	MSMQ-DCs	Message Queuing
2103	TCP	MSMQ-RPC	Message Queuing
2105	TCP	MSMQ-RPC	Message Queuing
2107	TCP	MSMQ-Mgmt	Message Queuing
2393	TCP	OLAP Services 7.0	SQL Server: Downlevel OLAP Client Support
2394	TCP	OLAP Services 7.0	SQL Server: Downlevel OLAP Client Support
2460	UDP	MS Theater	Windows Media Services
2535	UDP	MADCAP	DHCP Server
2701	TCP	SMS Remote Control (control)	SMS Remote Control Agent
2701	UDP	SMS Remote Control (control)	SMS Remote Control Agent
2702	TCP	SMS Remote Control (data)	SMS Remote Control Agent
2702	UDP	SMS Remote Control (data)	SMS Remote Control Agent
2703	TCP	SMS Remote Chat	SMS Remote Control Agent
2703	UPD	SMS Remote Chat	SMS Remote Control Agent
2704	TCP	SMS Remote File Transfer	SMS Remote Control Agent
2704	UDP	SMS Remote File Transfer	SMS Remote Control Agent
2725	TCP	SQL Analysis Services	SQL Analysis Server
2869	TCP	UPNP	Universal Plug and Play Device Host
2869	TCP	SSDP event notification	SSDP Discovery Service
3268	TCP	Global Catalog Server	Local Security Authority
3269	TCP	Global Catalog Server	Local Security Authority
3343	UDP	Cluster Services	Cluster Service
3389	TCP	Terminal Services	NetMeeting Remote Desktop Sharing
3389	TCP	Terminal Services	Terminal Services
3527	UDP	MSMQ-Ping	Message Queuing
4011	UDP	BINL	Remote Installation
4500	UDP	NAT-T	Local Security Authority
5000	TCP	SSDP legacy event notification	SSDP Discovery Service
5004	UDP	RTP	Windows Media Services
5005	UDP	RTCP	Windows Media Services
6001	TCP	Information Store	Exchange Server 2003
6002	TCP	Directory Referral	Exchange Server 2003
6004	TCP	DSProxy/NSPI	Exchange Server 2003
42424	TCP	ASP.Net Session State	ASP.NET State Service
51515	TCP	MOM-Clear	Microsoft Operations Manager 2000
1024-65534	TCP	RPC	Randomly allocated high TCP ports

Microsoft provides the information in this table in a Microsoft Excel worksheet. This worksheet is available for download from the Microsoft Download Center:
Download the Port_Requirements_for_Microsoft_Windows_Server_System.xls package now.

Active Directory port and protocol requirements

Application servers, client computers and domain controllers that are located in common or external forests have service dependencies so that user and computer initiated operations like domain join, logon authentication, remote administration, and Active Directory replication work correctly. Such services and operations require network connectivity over specific port and networking protocols.

A summarized list of services, ports and protocols required for member computers and domain controllers to inter-operate with each other or for application servers to access Active Directory include but are not limited to the following:

1. Active Directory / LSA
2. Certificate Services (required for specific configurations)
3. Computer Browser
4. DHCP Server (if so configured)
5. Distributed File System
6. Distributed Link Tracking Server (optional but on by default on Windows 2000 computers)
7. Distributed Transaction Coordinator
8. DNS Server (if so configured)
9. Event Log
10. Fax Service (if so configured)
11. File Replication
12. File Server for Macintosh (if so configured)
13. HTTP SSL
14. Internet Authentication Service (if so configured)
15. Kerberos Key Distribution Center
16. License Logging (on by default)
17. Messenger
18. Net Logon
19. Performance Logs and Alerts
20. Print Spooler
21. Remote Installation (if so configured)
22. Remote Procedure Call (RPC)
23. Remote Procedure Call (RPC) Locator
24. Remote Storage Notification
25. Remote Storage Server
26. Routing and Remote Access
27. Server
28. Simple Mail Transfer Protocol (SMTP) (if so configured)
29. SNMP Service
30. SNMP Trap Service
31. TCP/IP Print Server
32. Telnet
33. Terminal Services
34. Terminal Services Licensing
35. Terminal Services Session Directory
36. WINS
37. Windows Time
38. World Wide Web Publishing Service