MORE INFORMATION
The RSQ(array1, array2) function returns the Square of the Pearson Product-Moment Correlation Coefficient between two arrays of data.
Syntax
The arguments, array1 and array2, must be either numbers or names, array constants, or references that contain numbers.
The most common usage of RSQ includes two ranges of cells that contain the data, such as RSQ(A1:A100, B1:B100).
Example Usage
To illustrate the RSQ function, follow these steps:
- Create a blank Excel worksheet, and then copy the following table:
| 1 | | = 3 + 10^$D$2 | Power of 10 to add to data |
| 2 | =4 + 10^$D$2 | | 0 |
| 3 | =2 + 10^$D$2 | | |
| 4 | =5 + 10^$D$2 | | |
| 5 | =4+10^$D$2 | | |
| 6 | =7+10^$D$2 | | pre-Excel 2003 |
| =RSQ(A1:A6,B1:B6) | | | when D2 = 7.5 |
| =PEARSON(A1:A6,B1:B6)^2 | | RSQ = PEARSON^2 | 0.492857142857143 |
| =CORREL(A1:A6,B1:B6)^2 | | CORREL^2 | 0.509470304975923 |
| | | |
| | | when D2 = 8 |
| | RSQ = PEARSON^2 | #DIV/0! |
| | CORREL^2 | 0.509470304975923 |
- Select cell A1 in your blank Excel worksheet, and then click Paste on the Edit menu so that the entries in the table fill cells A1:D13 in your worksheet.
- After you paste the table in your new Excel worksheet, click the Paste Options button, and then click Match Destination Formatting. With the pasted range still selected, point to Column on the Format menu, and then click AutoFit Selection
Note You may want to format cells B1:B6 as Number with 0 decimal places.
Cells A1:A6 and B1:B6 contain the two data arrays that are used in this example to call RSQ, PEARSON, and CORREL in cells A8:A10. RSQ is calculated by essentially calculating PEARSON and squaring the result. Because PEARSON and CORREL both compute the Pearson Product-Moment Correlation Coefficient, their results should agree. RSQ could have been (but was not) implemented as essentially calculating CORREL and squaring the result.
In versions of Excel that are earlier than Excel 2003, PEARSON may exhibit round-off errors. This behavior leads to round-off errors in RSQ. The behavior of PEARSON, and therefore of RSQ, has been improved for Excel 2003. CORREL has always been implemented by using the improved Excel 2003 procedure. Therefore, an alternative to RSQ for an earlier version of Excel is to use CORREL instead and then to square the result.
In versions of Excel that are earlier than Excel 2003, you can use the worksheet in this article to run an experiment and to discover when round-off errors occur. If you add a constant to each of the observations in B1:B6, the values of RSQ, PEARSON^2, and CORREL^2 in cells A7:A9 should not be affected. If you increase the value in D2, a larger constant is added to B1:B6. If D2 <= 7, there are no round-off errors that appear in A7:A9. Now change the value of 7.25, 7.5, 7.75, and then 8. CORREL^2 in A9 is unaffected, but RSQ and PEARSON^2 ( (these expressions always agree with each other) show round-off errors in A7:A8. D6:D13 show values of RSQ = PEARSON^2 and CORREL^2 when D2 = 7.5 and 8, respectively.
Note that CORREL is still well-behaved, but round-off errors in PEARSON have become so severe that division by 0 occurs in RSQ and PEARSON^2 when D2 = 8.
Earlier versions of Excel exhibit incorrect answers in these cases because the effects of round-off errors are more profound with the computational formula that is used by these versions. Still, the cases that are used in this experiment may be viewed as extreme.
If you have Excel 2003, you see no changes in values of RSQ and PEARSON^2 if you try the experiment. However, cells D6:D13 show round-off errors that you would have obtained with earlier versions of Excel.
Results in Earlier Versions of Excel
If you name the two data arrays X's and Y's, earlier versions of Excel used a single pass through the data to compute the sum of squares of X's, the sum of squares of Y's, the sum of X's, the sum of Y's, the sum of XY's, and the count of the number of observations in each array. These quantities were then combined in the computational formula that is given in the Help file in earlier versions of Excel. The Help file for RSQ shows the formula for the Pearson Product-Moment Correlation Coefficient. This result is squared to obtain RSQ.
Results in Excel 2003
The procedure that is used in Excel 2003 uses a two-pass process through the data. First, the sums of X's and Y's and the count of the number of observations in each array are computed, and from these the means (averages) of X and Y observations can be computed. Then, on the second pass, the squared difference between each X and the X mean is found, and these squared differences are summed. The squared difference between each Y and the Y mean is found, and these squared differences are summed. Additionally, the products (X - X mean) * (Y - Y mean) are found for each pair of data points and summed. These three sums are combined in the formula for PEARSON. Notice that none of the three sums is affected if you add a constant to each value in the Y array (or in the X array). This behavior occurs because that same value is added to the Y mean (or to the X mean). In the numeric examples, even with a high power of 10 in cell D12, these three sums are not affected, and the results of the second pass are independent of the entry in cell D2. Therefore, the results in Excel 2003 are more stable numerically.
Conclusions
Replacing a one-pass approach by a two-pass approach guarantees better numeric performance of PEARSON, and therefore RSQ, in Excel 2003. Excel 2003 results will never be less accurate than results in earlier versions of Excel.
In most practical examples, you are not likely to see a difference between the Excel 2003 results and the results in earlier versions of Excel. This behavior occurs because typical data is unlikely to exhibit the kind of unusual behavior that this experiment illustrates. Numeric instability is most likely to appear in earlier versions of Excel when data contains a high number of significant digits combined with relatively little variation between data values.
The procedure of finding the sum of squared deviations about a sample mean by
- finding the sample mean,
- computing each squared deviation, and
- summing the squared deviations
is more accurate than the alternative procedure (frequently named the "calculator formula" because it was suitable for use of a calculator on a small number of data points). The alternative procedure would:
- find the sum of squares of all observations, the sample size, and the sum of all observations, and then
- compute the sum of squares of all observations minus ([sum of all observations]^2)/sample size).
There are many other functions that have been improved for Excel 2003 by replacing this latter one-pass procedure with the two-pass procedure that finds the sample mean on the first pass and computes the sum of squared deviations about it on the second pass.
The following is a list of such functions:
- VAR
- VARP
- STDEV
- STDEVP
- DVAR
- DVARP
- DSTDEV
- DSTDEVP
- FORECAST
- SLOPE
- INTERCEPT
- PEARSON
- RSQ
- STEYX
Similar improvements were made in each of the three Analysis of Variance tools in the Analysis ToolPak.
For more information about the RSQ function, click
Microsoft Excel Help on the
Help menu, type
rsq in the
Search for box in the Assistance pane, and then click
Start searching to view the topic.