Automated Deployment services takes a long time to deploy an image (827085)

SYMPTOMS

When you use Automated Deployment Services (ADS) to deploy an image, the deployment may take a long time (between 30 minutes and 4 hours, depending on the image). On the device that is started with the ADS Deployment Agent, you may notice the network connection status fluctuate between connected and disconnected.

CAUSE

This issue occurs if the sending port and the receiving port on the network card that is installed in the device that is running the ADS Deployment Agent have different settings for the speed and the mode of the network card. This issue may also occur if you are using network hardware, such as a switch or a router, that can affect the speed or mode of network connections.

RESOLUTION

To resolve this problem, adjust the settings of your network card, switch, or router, so that the settings for the speed and the mode of both the sending port and the receiving port are the same. If this does not correct the problem, you must contact the original equipment manufacturer (OEM) of your network card to obtain information about how to change the default network speed. As part of this process, you may have to obtain a new driver and install it in the Program Files\Microsoft ADS\NBS\Repository\User\PreSystem folder on your Windows Server 2003-based computer.

MORE INFORMATION

For information about how to contact the OEM of your network adaptor, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:

65416 Hardware and software vendor contact information, A-K

60781 Hardware and software vendor contact information, L-P

60782 Hardware and software vendor contact information, Q-Z

Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.