Large TrueType Fonts Print with Fine Lines on LaserJet II (82362)
The information in this article applies to:
- Microsoft Windows 3.1
- Microsoft Windows 3.11
This article was previously published under Q82362 SYMPTOMS
Printing TrueType fonts larger than 80 points on some Hewlett-Packard
(HP) LaserJet Series II printers sometimes adds or subtracts fine,
pixel-wide lines.
CAUSE
This is a known firmware problem with HP LaserJet Series II printers and is
not a problem with the TrueType rasterizer.
WORKAROUND
To work around this problem, print TrueType fonts as graphics, as
follows:
- Run Control Panel.
- Choose the Printers icon.
- From the list of printers, select the HP LaserJet Series II
printer.
- Choose the Setup button.
- Choose the Options button.
- Select the Print TrueType As Graphics check box.
The HP products included here are manufactured by vendors independent of
Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.
| Modification Type: | Minor | Last Reviewed: | 6/14/2004 |
|---|
| Keywords: | kbdownload KB82362 |
|---|
|