MORE INFORMATION
NBI Legacy
If you have been running Legacy with Windows version 3.0, you might
see some differences when you run this application with Windows
version 3.1. For example, you might not be able to print device fonts
on Hewlett-Packard Series III printers. If you are not using Legacy
version 2.0 or later, you should obtain an updated version.
To obtain an updated version of Legacy, contact your software vendor
or NBI, Incorporated, at 1-800-NBI-1111. Outside the United States,
contact your local software vendor or NBI subsidiary.
Norton Desktop 1.0
If you have been running Norton Desktop version 1.0 with Windows
version 3.0, you might see some differences when you run this
application with Windows version 3.1. For example, when you try to
change an icon's label, you may need to select the icon twice before
you can begin the task.
If you have difficulty getting Desktop to run, you might need to make
the following changes to the [386Enh] section of your SYSTEM.INI file:
Add the line device=*vdmad and remove the line:
device=vdmadx.386.
For information about obtaining an updated version of Norton Desktop,
call the Peter Norton Group of the Symantec Corporation at
408-253-9600. Outside the United States, contact your local software
vendor or Symantec subsidiary.
PFS:WindowsWorks
If you have been running PFS:WindowsWorks with Windows version 3.0,
you might see some differences when you run this application with
Windows version 3.1. For example, you might have difficulty printing
files in landscape orientation.
To obtain an updated version of PFS:WindowsWorks, contact your
software vendor or call Spinnaker Software Corporation at
617-494-5261. Outside the United States, contact your local software
vendor or Spinnaker Software subsidiary.
Powersoft Powerbuilder 1.0
To run Powersoft Powerbuilder with Windows version 3.1, you need to
use Powerbuilder version 1.0b or later.
To obtain an updated version of Powerbuilder, contact your software
vendor or call Powersoft Corporation at 617-229-2200. Outside the
United States, contact your local software vendor or Powersoft
subsidiary.
SofNet FAXit for Windows
To run SofNet FAXit for Windows with Windows version 3.1, you need to
use FAXit version 2.5 or later.
If you have difficulty sending a fax, adding the following line to the
[386Enh] section of your SYSTEM.INI file might solve the problem:
comxbuffer=0
For information about obtaining an update to FAXit version 1.53 that
was supplied with the Intel SatisFAXtion board, call the Intel
Corporation at 1-800-256-3071.
For information about obtaining an update to FAXit versions 2.0 and
later, call SofNet at 404-984-8088. Outside the United States, contact
your local software vendor or SofNet subsidiary.
Software Publishing Harvard Graphics for Windows
If you want to use TrueType fonts with Harvard Graphics, you must
select a printer driver other than the Magicorp driver.
For information about obtaining an updated version, contact your
software vendor or call Software Publishing Corporation at
408-986-8000. Outside the United States, contact your local software
vendor.
WordPerfect for Windows
If you have been running WordPerfect version 5.1 with Windows version
3.0 and you find that it runs differently with Windows version 3.1,
you need to obtain an updated version of Wordperfect.
For information about obtaining an updated version of WordPerfect,
contact your software vendor or WordPerfect Corporation at
1-800-228-1029. Outside the United States, contact your local software
vendor or WordPerfect subsidiary.
WordStar for Windows
If you have been running WordStar for Windows with Windows version
3.0, you might see some differences when you run this application with
Windows version 3.1. For example, some elements of the WordStar screen
might not be displayed the same as they were in Windows version 3.0.
Windows version 3.1 uses descriptive printer-model names for printer
drivers. Because WordStar does not recognize the new names, you need
to update your WordStar templates. Do this by opening a template,
selecting the printer you are using, and then saving the new
information in the template.
To obtain an updated version of WordStar for Windows, contact your
software vendor or call Wordstar International, Incorporated, at
1-800-227-5609. Outside the United States, contact your local software
vendor or WordStar subsidiary.
The products included here are manufactured by vendors independent of
Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.