Error -613 Occurs When You Perform an Online Backup (814891)


The information in this article applies to:

  • Microsoft Exchange 2000 Server
  • Microsoft Exchange 2000 Enterprise Server

SYMPTOMS

When you perform an online backup of a storage group, a mailbox store, or a public folder store, the operation may be unsuccessful. Additionally, an error -613 : JET_errSLVReadVerifyFailure occurs (mismatch Checksum in SLV file during backup) and the following event ID messages may be logged in the Application event log: Event Type: Information
Event Source: NTBackup
Event ID: 8000
Description:
Begin Backup of 'MAILMASTER\Microsoft Information Store\'First Storage Group' Verify: Off Mode: Append

-and-

Type: Normal
Event Type: Information
Event Source: ESE
Event ID: 210
Description:
Information Store (1812) e85d4e03-5bb3-44c5-bd2f-1343972a1b1a: A full backup is starting.

-and-

Event Type: Information
Event Source: ESE
Event ID: 220
Description:
Information Store (1812) e85d4e03-5bb3-44c5-bd2f-1343972a1b1a: Beginning the backup of the file D:\Programme\Exchsrvr\mdbdata\priv1.stm (size 2850 Mb).

-and-

Event Type: Error
Event Source: ESE
Event ID: 478
Description:
Information Store (1812) The streaming page read from the file "D:\Programme\Exchsrvr\mdbdata\priv1.stm" at offset 693297152 (0x000000002952e000) for 4096 (0x00001000) bytes failed verification due to a page checksum mismatch. The expected checksum was 3505519770 (0xd0f1fc9a) and the actual checksum was 3505518746 (0xd0f1f89a). The read operation will fail with error -613 (0xfffffd9b). If this condition persists then please restore the database from a previous backup.

-and-

Event Type: Error
Event Source: ESE
Event ID: 217
Description:
Information Store (1812) e85d4e03-5bb3-44c5-bd2f-1343972a1b1a: Error (-613) during backup of a database (file D:\Programme\Exchsrvr\mdbdata\priv1.stm). The database will be unable to restore. Event Type: Information Event Source: ESE Event Category: (3) Event ID: 222 Description: Information Store (1812) e85d4e03-5bb3-44c5-bd2f-1343972a1b1a: Ending the backup of the file D:\Programme\Exchsrvr\mdbdata\priv1.stm. Not all data in the file has been read (read 693239808 bytes out of 2988449792 bytes).

-and-

Event Type: Error
Event Source: NTBackup
Event ID: 8012
Description:
The 'Microsoft Information Store' returned error from ESE function call (d).from a call to 'HrESEBackupRead additional data

CAUSE

This problem may occur when you use a Web Distributed Authoring and Versioning (WebDAV) client to send messages to distribution lists and the distribution lists have one of the following options selected on the Exchange Advanced tab:
  • Send delivery reports to group owner
  • Do not send delivery reports
To view the Exchange Advanced tab:
  1. Start Active Directory Users and Computers.
  2. On the View menu, click Advanced Features.
  3. Right-click the distribution list, and then select the Exchange Advanced tab.

RESOLUTION

Cumulative Rollup Information

To resolve this problem, obtain the September 2003 Exchange 2000 Server Post-Service Pack 3 (SP3) Rollup. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:

824282 September 2003 Exchange 2000 Server Post-Service Pack 3 Rollup

Hotfix Information

A supported hotfix is now available from Microsoft, but it is only intended to correct the problem that is described in this article. Only apply it to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Exchange 2000 Server service pack that contains this hotfix.

To resolve this problem immediately, contact Microsoft Product Support Services to obtain the hotfix. For a complete list of Microsoft Product Support Services telephone numbers and information about support costs, visit the following Microsoft Web site:

http://support.microsoft.com/contactus/?ws=support

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Microsoft Support Professional determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question. The English version of this hotfix has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.
Component: Transport Core

   Date         Time   Version            Size    File name
   --------------------------------------------------------------
   12-May-2003  22:33  6.0.6465.0        131,072  Drviis.dll       
   12-May-2003  22:37  6.0.6465.0        307,200  Exsmtp.dll       
   12-May-2003  22:29  6.0.6465.0         94,208  Peexch50.dll     
   12-May-2003  22:31  6.0.6465.0        393,216  Phatcat.dll
Note Because of file dependencies, this update requires Microsoft Exchange 2000 Server Service Pack 3 (SP3). For additional information, click the article number below to view the article in the Microsoft Knowledge Base:

301378 How to Obtain the Latest Exchange 2000 Server Service Pack

STATUS

Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article.

MORE INFORMATION

The backup routine makes a call to the operating system to read a 4-kilobyte (KB) page of data from the database on a disk and writes it to tape. Before the data that is returned from the operating system call is committed to the tape, the online backup process compares the checksum value in the page header to the header that is being returned from the READ call (the checksum value in the page header is recorded when this page is written to disk). When the Exchange 2000 database engine detects that the checksum values do not match, it returns an error -613.

When you run eseutil /k, the following output about the database is returned:

- Summary on priv1.edb File:
D:\Program Files\Exchsrvr\Mdbdata\priv1.edb Checksum Status (% complete)
0 10 20 30 40 50 60 70 80 90 100
|----|----|----|----|----|----|----|----|----|----|
...................................................
1563234 pages seen
0 bad checksums
19857 uninitialized pages
0 wrong page numbers

- Summary on priv1.stm
File: D:\Program Files\Exchsrvr\Mdbdata\priv1.STM Checksum Status (% complete)
0 10 20 30 40 50 60 70 80 90 100
|----|----|----|----|----|----|----|----|----|----|
..............
ERROR: SLV checksum mismatch: Page 18149 (owned by 19:281:7f 01 00 00 00 00 8e e4 1d 08). Checksum length 4096 bytes. Expected checksum 0xf4aca7b5. Actual checksum 0xe881e6ff.
ERROR: SLV checksum mismatch: Page 18150 (owned by 19:281:7f 01 00 00 00 00 8e e4 1d 08). Checksum length 4096 bytes. Expected checksum 0xf5f6ddef. Actual checksum 0xddcea6c9.
ERROR: SLV checksum mismatch: Page 18151 (owned by 19:281:7f 01 00 00 00 00 8e e4 1d 08). Checksum length 1301 bytes. Expected checksum 0xf297edbf. Actual checksum 0xdcc4fa9d.
64512 pages seen
127 bad checksums
49276 uninitialized pages

How to Troubleshoot This Problem

Use the following procedure to find the cause of the problem:
  1. Save a database that does not have a mismatched checksum value (a correct database).
  2. Perform a typical online backup. After you finish the backup, leave the transaction logs on the disk.
  3. Wait for the next occurrence of the mismatched checksum value that occurs during online backup.
  4. Send the following items to Microsoft Product Support and Services (PSS):
    • The copy of the database that you saved in step 1
    • The database that is experiencing the problem
    • All the logs that have been created
  5. Replay the logs on the database you saved in step 1.
  6. Look for mismatched checksum values. You can run the eseutil /k db.edb command. This command automatically checks the .edb file and .stm file and returns the page number that has the mismatched checksum value.
  7. If a mismatched checksum value does not occur on the new correct database, compare the pages that have a mismatched checksum value between the incorrect database and the correct database. To do so, run the following command to dump the content of the page number n:

    esefile /d db.stm n

    After you run the command, review the output to find where the differences are in the message. The output may help you find a systematic method to reproduce the error.
Modification Type:MinorLast Reviewed:10/10/2005
Keywords:kbHotfixServer kbQFE kbQFE kbfix kbExchange2000preSP4fix kbbug KB814891
©2004 Microsoft Corporation. All rights reserved.