Virtual Communications Driver Functional Structure (75006)

MORE INFORMATION

The VCD is the ring 0 interrupt handler for COMM.DRV, the Windows communication driver, in the system VM. The VCD arbitrates COM port contention, by tracking port ownership. When Windows starts, VCD traps input and output for every COM port, which allows VCD to monitor all I/O activity from every VM. Under Windows 3.0, if a VM enables interrupts for a COM port, or attempts to output data, then VCD determines that the VM should own the port and attempts to assign ownership, or it displays a message box informing the user of the contention.

The functions of the VCD are listed below by category.

Initialization

VCD_Sys_Crit_Init, VCD_Device_Init, VCD_Init_Complete, and VCD_Init_Port initialize VCD.

VCD_Sys_Crit_Init attempts to read base and IRQ specifications from the SYSTEM.INI file.

VCD_Device_Init calls VCD_Init_Port to allocate memory for each COM port and to read its initial state. VCD_Device_Init also instances COM-related data structures in the BIOS data area and hooks the Interrupt 14h chain to enable VCD to process an Interrupt 14h before any virtual 8086 mode terminate-and-stay-resident programs (V86 TSRs) or device drivers do.

VCD_Create_VM, VCD_Init_VM_CB, and VCD_Set_IRQ_Procs initialize the COM structures VCD maintains for each VM. For each COM port in the system, VCD allocates and maintains a separate chunk of control block memory for each VM. VCD_Init_VM_CB initializes the control block structure for one COM port. VCD_Create_VM calls VCD_Init_VM_CB for each COM port. VCD_Set_IRQ_Procs sets up pointers to handler routines for IRQ processing; this is required to support port virtualization when another VxD wants to virtualize a COM port. When this happens, VCD cooperates and assists the other VxD.

Port Handling

Port handling refers to a group of routines that maintain ownership of a COM port.

VCD_Attach and VCD_Detach save and restore the state of the I/O ports that control a COM port.

VCD_Enable_Trapping and VCD_Disable_Trapping enable and disable I/O port trapping for a COM port.

VCD_Set_Owner_Event is an event procedure that sets up register parameters for calling into VCD_Set_Owner. If a VCD receives a hardware interrupt and the corresponding port is not currently owned, then VCD schedules an event to assign the port to the current VM.

VCD_Set_Owner calls VCD_Attach and VCD_Detach as necessary to assign a COM port to a VM.

VCD_Assign performs contention processing. When VCD detects that a new VM wants to own a port, VCD calls VCD_Assign. VCD_Assign first checks to see if the port is owned. If not, it can assign the port; otherwise, it must determine what should be done about the contention.

VCD_Virtualize_IRQ is called the first time that a COM port is assigned. It calls the virtual programmable interrupt controller device (VPICD) to virtualize the IRQ that the COM port uses.

Port Trapping

The routines VCD_Trap_COM1, VCD_Trap_COM2, VCD_Trap_COM3, and VCD_Trap_COM4 are the front-line routines that trap the I/O ports that correspond to a COM port. Each routine sets the ESI register to point to the correct COM data structure and drops into VCD_Dispatch_IO.

VCD_Dispatch_IO determines how to handle the I/O. In some cases it just handles it virtually by saving the written data or by returning the current virtual state. VCD_Dispatch_IO can also perform physical I/O if the port is already owned, and it can call VCD_Assign to assign the port.

The individual routines for the virtual I/O are:

VCD_Virt_In_Out_RxTxB, VCD_Virt_In_Out_IER, VCD_Virt_In_IIR, VCD_Virt_In_LCR, VCD_Virt_Out_LCR, VCD_Virt_In_MCR, VCD_Virt_Out_MCR, VCD_Virt_In_LSR, and VCD_Virt_In_MSR. These routines handle INs and OUTs for a single I/O port associated with a COM port.

Miscellaneous

VCD_Control is the control procedure that is required in every VxD to handle system control broadcasts (see System_Control service in Chapter 33 of the "Microsoft Windows Device Development Kit Virtual Device Adaptation Guide").

VCD_Set_Focus forces ownership of "global" COM ports to the current VM. This service is most often used for a serial mouse, so that COM interrupts go to the VM that has the focus and, therefore, owns the mouse.

VCD_Suspend_VM calls VCD_Clear_Int to clear any outstanding interrupts for a COM port when its owner VM is suspended.

VCD_Notify_VxD notifies another VxD about state changes for a COM port that has been virtualized with the VCD_Virtualize_Port service.

VCD_Destroy_VM calls VCD_Detach through VCD_Detach_If_Owner for any COM ports owned by the VM that is being destroyed.

VCD_Soft_Int_14h monitors Interrupt 14h calls and records the current system time as an indication of "last use;" this time is used to determine if a port can be stolen when contention is detected.

Interrupt Processing

VCD_Int_for_1, VCD_Int_for_2, VCD_Int_for_3, and VCD_Int_for_4 are the front-line routines called by VPICD when a hardware interrupt for a COM port requires service. Each routine sets up ESI to point to the correct COM data structure and then jumps to the actual handler.

VCD_VirtInt_For_1, VCD_VirtInt_For_2, VCD_VirtInt_For_3, and VCD_VirtInt_For_4 are all similar to VCD_Int_for_x, but handle VPICD calls for virtual interrupts simulated into a VM.

VCD_EOI_for_1, VCD_EOI_for_2, VCD_EOI_for_3, and VCD_EOI_for_4 are also similar, but handle VPICD calls for when a VM executes an EOI instruction to end processing of a COM port's simulated interrupt.

VCD_Mask_for_1, VCD_Mask_for_2, VCD_Mask_for_3, and VCD_Mask_for_4 are also similar and handle VPICD calls for when a VM masks or unmasks a COM port's IRQ.

VCD_IRET_For_1, VCD_IRET_For_2, VCD_IRET_For_3, and VCD_IRET_For_4 are also similar and handle VPICD calls for when a VM returns from a simulated interrupt (IRET).

VCD_Sharable_Int is the default hardware interrupt handler when a COM port's IRQ is shared with another device in the system, including another COM port. VCD_Sharable_Int reads and records the interrupt identification register for the port and checks to see if the port has requested an interrupt. If the port has requested an interrupt, then it falls into VCD_Int. If not, it chains the interrupt to the next handler.

VCD_Int is the default hardware interrupt handler. VCD_Int determines if ownership needs to be assigned, in which case it schedules an event; otherwise, it requests a virtual interrupt into the owner VM by calling VPICD.

VCD_Sharable_EOI and VCD_EOI watch for the VM to enable an interrupt and boost the execution time of the VM to give it some extra time to process the interrupt.

VCD_Mask is the default mask handler that is called when a VM masks or unmasks a COM port IRQ. VCD_Mask calls VCD_Assign to attempt to assign ownership of the COM port to the current VM.

VCD_Xmit_CallBack, VCD_Enable_THRE, VCD_Sharable_COMM_Int, VCD_COMM_Int, VCD_LineStat, VCD_DataAvail, VCD_XmitEmpty, VCD_ModemStatus, and VCD_Eat_Interrupt essentially duplicate the functionality of the interrupt handler built into COMM.DRV. This duplication provides a 32-bit ring 0 interrupt handler to an application developed for Windows through the standard Windows COMM interface and significantly improves the performance of enhanced mode Windows.

Services

The VCD_Virtualize_Port service provides a way for another VxD to claim virtualization ownership of a COM port. The VxD can then handle trapped I/O and hardware interrupts. VCD passes interrupts to this other VxD, maintains port ownership state information, and handles contention between VMs.

VCD_Get_Version returns a VxD implementation version number.

VCD_Set_Port_Global is called by the virtual mouse driver (VMD) to indicate that the COM port used by the mouse should be considered global and to disable contention checking.

VCD_Get_Focus determines the current owner of a COM port.

Protected Mode Functions (Mainly Provided for COMM.DRV Interface)

A function in VCD enables COMM.DRV and the Windows Control Panel to send data to VCD.

VCD_PM_Get_Version returns the current implementation version.

VCD_PM_Get_Port_Array returns an array of available COM ports.

VCD_PM_Get_Port_Behavior returns the current value of the "auto assign" time limit used to determine how to handle contention.

VCD_PM_Set_Port_Behavior allows the Control Panel to modify the "auto assign" value for a COM port.

VCD_PM_Acquire_Port and VCD_PM_Free_Port are used by COMM.DRV to enable and disable the special ring 0 interrupt handler implemented in the VCD.

Debugging

VCD_Debug_Dump and VCD_Dump2 are available in the debugging version of VCD. These routines dump a few of the internal data structures maintained by VCD.

NOTE: For a detailed description of the communications driver functional structure of Windows for Workgroups 3.11, please refer to the document VCOMM.DOC in the DDK.