HP Plotters Supported with Windows 3.0 (72051)


The information in this article applies to:

  • Microsoft Windows 3.0
  • Microsoft Windows 3.0a
This article was previously published under Q72051

SUMMARY

The following Hewlett-Packard (HP) Plotters are supported by version NVF27MAR90 (version 2.2) of the Plotter driver:

Colorpro (7440A)
Colorpro with the Graphics Enhancement Cartridge (7440A and 17440A)
7470A
7475A
7550A
7580A
7585A
7580B
7585B
7586B
Draftpro (7570A)/DXL/EXL
Draftmaster I (7595A)
Draftmaster II (7596A)

If you use 7580B and 7585B, use the equivalent 7580A or 7585A driver IF the plotter serial number prefix is less than 2402.

MORE INFORMATION

To verify the above version number, follow these steps:
  1. From the Control Panel, select Printers.
  2. Select the Plotter driver, then press Configure.
  3. Select Setup.
  4. In the upper left-hand corner of the Plotter dialog box, click the Control menu and choose About. This will give you the version number and the supported plotters.
Modification Type:MinorLast Reviewed:7/7/2005
Keywords:KB72051
©2004 Microsoft Corporation. All rights reserved.