TI Omnilaser 2115 Requires Firmware Version 2.613 or 2.635 (64467)
The information in this article applies to:
- Microsoft Windows 3.0
- Microsoft Windows 3.0a
This article was previously published under Q64467 SUMMARY
You need Firmware version 2.613 or 2.635 to print to the Texas Instruments
(TI) Omnilaser 2115 printer from Microsoft Windows version 3.0. If the
printer has either of these Firmware versions, the ROM version does not
matter.
MORE INFORMATION
You can determine what Firmware version is being used by printing a printer
status report. The Firmware version should appear at the top of the page.
For further information, please refer to the Omnilaser's documentation for
the exact method of determining the Firmware version.
For more information, contact Texas Instruments.
The products included here are manufactured by vendors independent of
Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.
Modification Type: | Minor | Last Reviewed: | 7/7/2005 |
---|
Keywords: | KB64467 |
---|
|