Codepage Support Setup Information (60080)

SUMMARY

Microsoft MS-DOS version 3.30 introduced the use of codepages. Codepages can only be used with devices that have codepage support files (such as EGA or LCD displays, or some printers). To install a different codepage on your system, you need to add certain commands to your CONFIG.SYS and AUTOEXEC.BAT files.

MORE INFORMATION

The following commands should be added to your CONFIG.SYS file to add codepage support

   DEVICE=[drive:][path]DISPLAY.SYS con=(<devname>,yyy,2)
   COUNTRY=xxx[,[yyy],[drive:][path]country.sys

where: xxx is the country code
yyy is the default codepage used by the machine hardware (in North America, this is usually 437).

The following lines should be added to your AUTOEXEC.BAT file to add codepage support

   nlsfunc
   mode <device> codepage prepare=((www)[drive:][path]<devname>.cpi)
   chcp www
   mode <device> codepage select=www
   keyb zz,www,[drive:][path]<devname>.cpi

where:

www is the codepage for the country
zz is a two-letter keyboard code
<device> is the device to support codepage switching
<devname> is the name of the codepage information file

Listed below is a sample codepage setup that demonstrates what changes need to be made to your CONFIG.SYS and AUTOEXEC.BAT files so that you can use the Norwegian Codepage on a system with an EGA display:

   rem CONFIG.SYS
   files=30
   buffers=30
   device=e:\dos\display.sys con=(ega,437,2)
   country=001,437,e:\dos\country.sys
   rem AUTOEXEC.BAT
   nlsfunc
   mode con codepage prepare=((850)e:\dos\ega.cpi)
   chcp 850
   mode con codepage select=850
   keyb us,850,e:\dos\keyboard.sys