Mac DOS: Phase 2 Drivers Required for LocalTalk PC Card (58545)


The information in this article applies to:

  • Microsoft Mail for AppleTalk Networks, MS-DOS workstation 2.0
  • Microsoft Mail for AppleTalk Networks, MS-DOS workstation 3.0
This article was previously published under Q58545

SUMMARY

To run Microsoft Mail (PC Client) version 2.0 or 3.0 on a computer using the LocalTalk PC Card from Apple Computer, Inc., and AppleTalk Phase 2 drivers provided with AppleShare PC version 2.00, you must load the following modules into memory: 
 
Module                         Description
------                         -----------

LSL.COM                        Link support layer driver

ATALK.COM                      AppleTalk protocol stack

LTALK.COM or LTALKP.COM        Link interface driver for LocalTalk PC
                               card

PAP_WS.COM                     Printer access protocol for workstation

COMPAT.COM                     Provides compatibility for AppleShare
                               versions 1.x applications
Whether or not the LTALK.COM or LTALKP.COM module should be loaded depends on the driver type selected from the AppleShare PC Install program (polled driver or interrupt driven driver). The total amount of memory (RAM) that will be used by these modules is 61K.
Modification Type:MajorLast Reviewed:5/20/2003
Keywords:KB58545
©2002 Microsoft Corporation. All rights reserved.