Information (HDS, Tracks, RWC, Cylinder WP) about 174 different hard disk drives (36948)
The information in this article applies to:
- Customer Service and Support Information
This article was previously published under Q36948 SUMMARY The following charts give information about 174 different
hard disk drives. The information includes the following information, which is
designated by the accompanying abbreviations:
- Number of Heads (HDS)
- Number of Cylinders (Tracks) (CYL)
- Reduced Write Current (RWC)
- Write Pre-compensation Cylinder (Cylinder WP).
The numbered notes correspond to the following:
- Wedge Servo - Do not use on the IBM XT controller, and do
not use on revision "A" XEBEC 1210 and 1220 controllers.
- Drive connector J1 pin 2 may need to be disabled when used
on the IBM AT.
- Removable media.
- Remove jumper W3 before installing.
Modification Type: | Minor | Last Reviewed: | 2/27/2004 |
---|
Keywords: | KB36948 |
---|
|