Hewlett Packard PhotoSmart 1000 Series Printer Does Not Work with Printer Port Problems (330178)
The information in this article applies to:
- Microsoft Windows XP Professional
- Microsoft Windows XP Home Edition
This article was previously published under Q330178 SYMPTOMSYou may experience either of the following symptoms that are
related to your Hewlett Packard PhotoSmart 1000 series printer:
CAUSE This issue may occur if your printer port settings are
configured incorrectly. RESOLUTION To resolve this issue:
- Right-click My Computer, and then click
Manage.
- Expand System Tools, and then double-click
Device Manager.
- Double-click Ports (COM & LPT), and
then determine if the LTP printer port is listed as "ECP Printer Port". If it
is, go to step 4, and do not complete the rest of step 3. If it is not, change
the setting for this port to ECP in your computer BIOS. For information about
how to do so, see the documentation that was included with your computer or
your mainboard.
- Double-click ECP Printer Port (LPT), and
then click the Port Settings tab.
- Click Use any interrupt assigned to the
port, click to select the Enable legacy Plug and Play
detection check box, and then click OK.
- Restart your computer.
Modification Type: | Minor | Last Reviewed: | 4/29/2003 |
---|
Keywords: | kbprint kbHardware kbprb KB330178 |
---|
|