SUMMARY
This step-by-step article describes the issues that are related to starting a Windows 2000-based computer without an attached keyboard. Note that this is not possible on all computers because of specific firmware restrictions in the Basic Input/Output System (BIOS).
back to the top
Firmware Considerations
To start Windows 2000 with the keyboard unattached you must first make sure that your BIOS does not require a boot password. View the documentation that is included with your computer for instructions about how to remove the BIOS boot password. Your BIOS must also support starting your computer with no keyboard attached. If it does not support this feature, you receive a keyboard error message during the power-on self test (POST), and your computer will not start. If this occurs, you cannot start your computer without an attached keyboard.
back to the top
Windows 2000 Boot Sequence Considerations
Although it is not required, you may want to log on to a user account after you start your computer. If you want to do this without a keyboard attached, you must turn on the Automatic Logon feature.
WARNING: The Windows 2000 Automatic Logon feature starts the Windows 2000 operating system without requiring user credentials. Remember that with the Automatic Logon feature turned on, the computer starts by using only the specified "default" identity. In many environments, this can create security problems. There is also a risk that timing conflicts can occur. For example, if you have several network protocols loaded, automatic logon may make Windows 2000 try to connect to network resources before the network connections are completely initialized.
back to the top
Turn on the Automatic Logon Feature in Windows 2000
For additional information about how to turn on the Automatic Logon feature for a Windows 2000 Professional-based computer that is not joined to a domain, click the article number below
to view the article in the Microsoft Knowledge Base:
234562 HOW TO: Enable Automatic Logon in Windows 2000
For additional information about how to turn on the Automatic Logon feature for Windows 2000 Server, Windows 2000 Advanced Server, or a Windows 2000 Professional-based computer that is joined to a domain, click the article number below
to view the article in the Microsoft Knowledge Base:
310584 HOW TO: Enable Automatic Logon in Windows
: In a typical hardware configuration (keyboard attached), you can bypass the automatic logon process and log on as a different user by holding down the SHIFT key after you log off or after you restart Windows 2000. This is not an option with the keyboard unattached.
back to the top