How To Use the Remote Shutdown Tool to Shut Down and Restart a Computer in Windows 2000 (317371)

SUMMARY

This article describes how to use the Remote Shutdown tool (Shutdown.exe) to shut down and restart a local or remote Windows 2000-based or Microsoft Windows NT 4.0-based computer.

Shutdown.exe is available in the Microsoft Windows 2000 Resource Kit. It is a command-line tool that you can use to shut down or restart a local or remote computer that is running Windows 2000 or Windows NT 4.0. If you want to schedule a computer to shut down and restart at a specific time, use Shutdown.exe in combination with the at command or Task Scheduler.

back to the top

Description of the Shutdown.exe Tool

Shutdown.exe uses the following syntax: You can use the following switches with Shutdown.exe:

• \\computername: Use this switch to specify the remote computer to shut down. If you omit this parameter, the local computer name is used.
• /l (Note that this is a lowercase "L" character): Use this switch to shut down the local computer
• /a: Use this switch to quit a shutdown operation. You can do this only during the time-out period. If you use this switch, all other parameters are ignored.
• /r: Use this switch to restart the computer instead of fully shutting it down.
• /t:xx: Use this switch to specify the time (in seconds) after which the computer is shut down. The default is 20 seconds.
• "msg": Use this switch to specify a message during the shutdown process. The maximum number of characters that the message can contain is 127.
• /y: Use this switch to force a "yes" answer to all queries from the computer.
• /c: Use this switch quit all running programs. If you use this switch, Windows forces all programs that are running to quit. The option to save any data that may have changed is ignored. This can result in data loss in any programs for which data is not previously saved.

back to the top

Examples

• To shut down the local computer in two minutes and display a "The computer is shutting down" message, use the following line in a batch file or type it at a command prompt, and then press ENTER:

  shutdown /l /t:120 "The computer is shutting down" /y /c

  To cancel the shutdown process, type the following line at the command prompt, and then press ENTER:

  shutdown /l /a /y

• To shut down and restart a remote computer named "Support," use the following line in a batch file or type it at a command prompt, and then press ENTER:

  shutdown \\support /r

• To schedule the local computer to shutdown and restart at 10:00 P.M., type the following line at a command prompt, and then press ENTER:

  at 22:00 shutdown /l /r /y /c

• To schedule the local computer to shutdown and restart at 6:00 P.M. every weekday, type the following line at a command prompt, and then press ENTER:

  at 18:00 /every:M,T,W,Th,F shutdown /l /r /y /c

back to the top

Troubleshooting

The specified computer may not shut down when you use the Shutdown.exe tool to shut it down. This behavior can occur if the Unlock Computer dialog box appears on the desktop, or if the computer is locked. For additional information about how to resolve this issue, click the article numbers below to view the articles in the Microsoft Knowledge Base: back to the top