Description of the Windows XP Recovery Console (314058)

MORE INFORMATION

When you use the Windows Recovery Console, you can obtain limited access to the NTFS file system, FAT, and FAT32 volumes without starting the Windows graphical user interface (GUI). In the Windows Recovery Console, you can:

• Use, copy, rename, or replace operating system files and folders.
• Enable or disable service or device startup the next time that start your computer.
• Repair the file system boot sector or the Master Boot Record (MBR).
• Create and format partitions on drives.

Note Only an administrator can obtain access to the Windows Recovery Console so that unauthorized users cannot use any NTFS volume.

Starting the Windows Recovery Console

To start the Windows Recovery Console, use one of the following methods:

• Use the Windows Setup floppy disks or the Windows CD-ROM to start your computer. At the "Welcome to Setup" screen, press F10 or press 'R" to repair.
• Use the Winnt32.exe utility with the /cmdcons option to add the Windows Recovery Console to the Windows Startup folder. This procedure requires approximately 7 megabytes (MB) of hard disk space on the system partition to hold the Cmdcons folder and files.
  
  Important If you are using software mirroring, see the following article in the Microsoft Knowledge Base:

  229077 Mirroring prevents pre-installing the Recovery Console

• Follow the instructions in the following article in the Microsoft Knowledge Base:

  222478 Creating a template to run Recovery Console using a remote install server

Using the Command Console

After you start the Windows Recovery Console, you receive the following message: After you enter the number for the appropriate Windows installation, Windows will then prompt you to enter the Administrator account password.

Note If you use an incorrect password three times, the Windows Recovery Console quits. Also, if the Security Accounts Manager (SAM) database is missing or damaged, you cannot use the Windows Recovery Console because you cannot have correct authentication. After you enter your password and the Windows Recovery Console starts, type exit to restart the computer.

When you use Windows XP Professional, you can set group policies to enable automatic administrative logon.

For additional informationabout how to set Recovery Console to enable automatic administrative logon, click the following article number to view the article in the Microsoft Knowledge Base:

Restrictions and limitations of the Recovery Console

When you use the Windows Recovery Console, you can use only the following items:

• The root folder
• The %SystemRoot% folder and the subfolders of the Windows installation that you are currently logged on to
• The Cmdcons folder
• The removable media drives such as the CD-ROM drive or the DVD-ROM drive

Note If you try to obtain access to other folders, you may receive an "Access Denied" error message. Also, when you are using the Windows Recovery Console, you cannot copy a file from the local hard disk to a floppy disk. However, you can copy a file from a floppy disk or from a CD-ROM to a hard disk, and you can copy a file from one hard disk to another hard disk.

Available commands

HELP

Use the help command to list all the following supported commands:

   attrib    del        fixboot   more     set
   batch     delete     fixmbr    mkdir    systemroot
   bootcfg   dir        format    more     type
   cd        disable    help      net           
   chdir     diskpart   listsvc   rd            
   chkdsk    enable     logon     ren           
   cls       exit       map       rename  
   copy      expand     md        rmdir
				

ATTRIB

Use the attrib command with one or more of the following parameters to change the attributes of a file or a folder: Notes:

BATCH

Use this command to run commands that are specified in a text file. In the command syntax, inputfile specifies the text file that contains the list of commands to be run, and outputfile specifies the file that contains the output of the specified commands. If you do not specify an output file, the output appears on the screen.

BOOTCFG

Use this command for boot configuration and recovery. This command has the following options: Examples: You can use the following options:

CD and CHDIR

Use the cd and chdir commands to change to a different folder. For example, you can use the following commands: The chdir command treats spaces as delimiters. Because of this, you must put quotation marks ("") around a folder name that contains a space, for example: The chdir command works only in the system folders of the current installation of Windows, in removable media, in the root folder of any hard disk partition, or in the local installation sources.

CHKDSK

The chkdsk command checks the specified drive and repairs or recovers the drive if the drive requires it.The command also marks any bad sectors and it recovers readable information.

You can use the following options:

Note If you specify the /r option, the /p option is implied. When you specify the chkdsk command without arguments, the command checks the current drive with no options in effect.

When you run the chkdsk command, you are required to use the Autochk.exe file. CHKDSK automatically locates this file in the startup folder. If the Command Console was preinstalled, the startup folder is typically the Cmdcons folder. If CHKDSK cannot find Autochk.exe in the startup folder, CHKDSK tries to locate the Windows CD-ROM installation media. If it cannot find the installation media, CHKDSK prompts you for the location of the Autochk.exe file.

CLS

Use this command to clear the screen.

COPY

Use this command to copy a file. In the command syntax, source specifies the file to copy and destination specifies the folder or file name for the new file. You cannot use wildcard characters indicated by an asterisk (*), and you cannot copy a folder. If you copy a compressed file from the Windows CD-ROM, the file is automatically decompressed at the same time it is copied.

The source of the file can be removable media, any folder in the system folders of the current Windows installation, the root of any drive, the local installation sources, or the Cmdcons folder.

If destination is unspecified, the default destination is the current folder. If the file already exists, you are prompted whether you want the copied file to overwrite the existing file. The destination cannot be removable media.

DEL and DELETE

Use this command to delete a file. In the command syntax, drive: path filename specifies the file that you want to delete. The delete command works only in the system folders of the current Windows installation, in removable media, in the root folder of any hard disk partition, or in the local installation sources. The delete command does not accept wildcard characters.

DIR

Use this command to display a list of files and subfolders in a folder. In the command syntax, drive: path filename specifies the drive, folder, and files to list. The dir command lists all files, including hidden and system files. Files can have the following attributes: The dir command works only in the system folders of the current Windows installation, in removable media, in the root folder of any hard disk partition, or in the local installation sources.

DISABLE

Use this command to disable a Windows system service or driver. In the command syntax, servicename specifies the name of the service or driver that you want to disable.

Use the listsvc command to display all services or drivers that are eligible to be disabled. The disable command prints the old start type of the service before resetting the start type to SERVICE_DISABLED. Record the old start type if you must enable the service again.

The disable command displays the following start_type values:

DISKPART

Use this command to manage the partitions on your hard disk volumes. You can use the following options: You can determine the device name from the output of the MAP command, for example, \Device\HardDisk0. You can use the partition name instead of the drive name argument, for example, \Device\HardDisk0\Partition1. If you use no arguments, a user interface for managing your partitions appears.

Warning If you use this command, you can damage the partition table if the disk has been upgraded to a dynamic disk configuration. Do not modify the structure of dynamic disks unless you are using the Disk Management tool.

ENABLE

enable servicename start_type

You can use the enable command to enable a Windows system service or driver.

Use the listsvc command to display all eligible services or drivers to enable. The enable command prints the old start type of the service before resetting it to the new value. It is a good idea to note the old value, in case you have to restore the start type of the service.

Valid options for start_type are: If you do not specify a new start type, the enable command prints the old start type for you.

EXIT

Use the exit command to quit the Recovery Console and restart your computer.

EXPAND

Use this command to expand a file. In the command syntax, source specifies the name of the file to be expanded and destination specifies the folder for the new file. If you do not specify a destination, the command defaults to the current folder. You cannot include wildcard characters.

You can use the following options: If the source contains more than one file, you must use the /f:filespec parameter to identify the specific files to be expanded. You can include wildcard characters.

The destination can be any folder in the system folders of the current Windows installation, in the root of the drive, in the local installation sources, or in the Cmdcons folder. The destination cannot be removable media, and the destination file cannot be read-only. Use the attrib command to remove the read-only attribute.

Unless you use the /y option, the expand command prompts you if the destination file already exists.

FIXBOOT

Use this command to write the new Windows boot sector code on the system partition. In the command syntax, drive name is the drive letter where the boot sector will be written. This command fixes damage in the Windows boot sector. This command overrides the default setting, which writes to the system boot partition. The fixboot command is supported only on x86-based computers.

FIXMBR

Use this command to repair the MBR of the boot partition. In the command syntax, device name is an optional device name that specifies the device that requires a new MBR. Use this command if a virus has damaged the MBR and Windows cannot start.

Warning This command can damage your partition tables if a virus is present or if a hardware problem exists. If you use this command, you may create inaccessible partitions. We recommend that you run antivirus software before you use this command.

You can obtain the device name from the output of the map command. If you do not specify a device name, the MBR of the boot device is repaired, for example: If the fixmbr command detects an invalid or non-standard partition table signature, fixmbr command prompts you for permission before rewriting the MBR. The fixmbr command is supported only on x86-based computers.

FORMAT

Use this command to format the specified drive to the specified file system. In the command syntax, /Q performs a quick format of the drive, drive is the drive letter of the partition to format, and /FS:file-system specifies the type of file system to use such as FAT, FAT32, or NTFS. If you do not specify a file system, the existing file system format is used if it is available.

LISTSVC

The listsvc command lists all available services, drivers, and their start types for the current Windows installation. This command is useful in conjunction with the disable and enable commands.

The list is extracted from the %SystemRoot%\System32\Config\System hive. If the System hive is damaged or missing, the results are unpredictable.

LOGON

The logon command lists all detected installations of Windows and then requests the local administrator password for the copy of Windows that you want to log on to. If your first three tries to log on do not succeed, the console quits, and your computer restarts.

MAP

Use this command to list drive letters, file system types, partition sizes, and mappings to physical devices. In the command syntax, the arc parameter tells the map command to use ARC paths instead of Windows Device paths.

MD and MKDIR

The md and mkdir commands create new folders. Wildcard characters are not supported. The mkdir command works only in the system folders of the current installation of Windows, in removable media, in the root folder of any hard disk partition, or in the local installation sources.

MORE

Use this command to display a text file to the screen.

NET

Although the Help file states otherwise, the net command is not usable from the Recovery Console. The protocols stack is not loaded for the Recovery Console. Therefore, there is no networking function available.

RD and RMDIR

Use rd and rmdir commands to delete a folder. These commands work only in the system folders of the current Windows installation, in removable media, in the root folder of any hard disk partition, or in the local installation sources.

REN and RENAME

Use the ren and rename commands to rename a file.

Note You cannot specify a new drive or path for the renamed file. These commands work only in the system folders of the current Windows installation, in removable media, in the root folder of any hard disk partition, or in the local installation sources.

SET

You can use the set to display or modify four environment options. For additional information about how to use the set command, click the following article number to view the article in the Microsoft Knowledge Base:

SYSTEMROOT

The systemroot command sets the current working folder to the %SystemRoot% folder of the Windows installation that you are currently logged on to.

TYPE

Use the type command to display a text file.