Error Message: Error 720: No PPP Control Protocols Configured (312840)
The information in this article applies to:
- Microsoft Windows 98 Second Edition
- Microsoft Windows 98
This article was previously published under Q312840 SYMPTOMS
When you try to connect to the Internet with a dial-up connection, you may receive one of the following error messages:
- Error 720: No PPP Control Protocols Configured
- Error 720: Dial-Up networking could not negotiate a compatible set of network protocols you specified in Server Type settings. Check your network
configuration in network control panel and try the connection again
CAUSE
This can occur if TCP/IP is damaged or is not bound to your dial-up adapter.
RESOLUTIONHow to Resolve Damaged TCP/IP- Click Start, point to Settings, click Control Panel, and then double-click Network.
- Click TCP/IP that is bound to the dial-up adapter, and then
click Remove.
- This removes the TCP/IP protocol and the Client for Microsoft Networks (if this feature has been installed). Click OK.
- Restart your computer.
- Click Start, point to Settings, click Control Panel, and then double-click Network.
- Click Add, and then double-click Protocols.
- In the Manufacturers box, click Microsoft, and then double-click TCP/IP in the Network Protocols box.
- Click OK, and then restart your computer.
How to Resolve Missing TCP/IP- Click Start, point to Settings, click Control Panel, and then double-click Network.
- Click Add, and then double-click Protocols.
- In the Manufacturers box, click Microsoft, and then double-click TCP/IP in the Network Protocols box.
- Click OK, and then restart your computer.
Modification Type: | Minor | Last Reviewed: | 12/20/2004 |
---|
Keywords: | kbenv kberrmsg kbnetwork kbprb KB312840 |
---|
|