INFO: Event ID: 4135 ClusterNameResolution NetBIOSIsDisabled (289723)


The information in this article applies to:

  • Microsoft Application Center 2000
This article was previously published under Q289723

SUMMARY

Event ID: 4135
Source: Application Center
Description: The Application Center Name Resolution Service has detected NetBIOS is disabled on the management network adapter. For reliable network name resolution, NetBIOS should be enabled on the management network adapter.
Event Type: Warning

Troubleshooting Information

Meaning: The Application Center Name Resolution Service has detected that NetBIOS is disabled on the management network adapter.

Effect: Name resolution and intracluster communication will not work properly until the problem is fixed. For reliable network name resolution, NetBIOS should be enabled on the management network adapter. If the Application Center NetBT-Based Name Resolution service is enabled, it will automatically attempt to enable NetBIOS.

MORE INFORMATION

Possible Causes and Solutions

NetBIOS is disabled: NetBIOS is disabled on the management network adapter.

To enable NetBIOS:
  1. Click Start, point to Settings, point to Network and Dialup Connection, and right-click the network adapter.
  2. Click Properties.
  3. If the NetBIOS (or NWLink NetBIOS) protocol is in the Components list, make sure that it is selected. If it is not, continue with the next step.
  4. On the Properties sheet, click Install.
  5. In the Select Network Components Type dialog box, select Protocol, and then click Add.
  6. In the Select Network Protocol dialog box, select NWLink NetBIOS, and then click OK.

Other Solutions (listed in order of preference):
Modification Type:MajorLast Reviewed:5/6/2001
Keywords:kbDSupport kbinfo KB289723
©2002 Microsoft Corporation. All rights reserved.