OFF2000: Contents of the Service Pack 2 Administrative Update Readme (279179)
The information in this article applies to:
- Microsoft Office 2000 (Setup) Service Pack 2 (SP-2)
This article was previously published under Q279179 SUMMARY
The Office 2000 Service Pack 2 (SP-2) Administrative Update contains a file called Readadm.doc.
Please see the "More Information" section of this article for the steps required to extract Readadm.doc from the SP-2 Administrative download file and for the contents of Readadm.doc.
MORE INFORMATIONExtracting Readadm.doc
To extract Readadm.doc from the SP-2 Administrative download file, follow these steps: NOTE: If you have the SP-2 CD, the Readadm.doc file is already extracted in the \Sp2\Admin folder on the CD.
- Click Start and then click Run.
- In the Open box, type the following:
Path:\Sp2admin.exe /c /t:c:\Sp2admfiles
where Path is the location of the Sp2admin.exe file on your computer.
- Click Yes to accept the license agreement.
The contents of the Sp2admin.exe file are extracted to the c:\sp2admfiles folder.
Contents of Readadm.doc
------------------------------------------------------------
Office 2000 Service Pack 2 (SP-2)
November 2000
------------------------------------------------------------
(c) 2000 Microsoft Corporation. All rights reserved.
Table of Contents
----------------------
1. DESCRIPTION
1.1 System Requirements for Microsoft Office 2000 SP-2
1.2 Microsoft Office 2000 SP-2 Content
2. INSTALLING MICROSOFT OFFICE 2000 SP-2
2.1 Applications That Microsoft Office 2000 SP-2 Can Be Applied to
2.2 Updating Administrative Installation Points
2.3 How to Update Your Workstations to SP-2
2.4 How to Detect that the Update is Installed
-------------------
1. DESCRIPTION
1.1 System Requirements for Microsoft Office 2000 SP-2
---------------------------------------------------------
To successfully apply Office 2000 SP-2 Administrative Update, the target
Office 2000 administrative installation must be at SR-1 level. Office 2000
SP-2 will not install on an administrative installation that is at Office
2000 level.
The table below indicates the size of the SP-2 Administrative Update (sp2admin.exe)
File Name File Size
sp2admin.exe 29.5 MB
1.2 Microsoft Office 2000 SP-2 Content
-------------------------------------
Office 2000 SP-2 is a non-critical update aimed at corporate customers
that provides the latest product updates to Office 2000 SR-1. Office 2000
SP-2 contains updates that are already publicly available as individual
updates on Office Update website.
Office 2000 SP-2 will not be a prerequisite for any future Office 2000
updates. Having Office 2000 SR-1 will remain the prerequisite for the
installation of future Office 2000 updates.
The publicly available updates included in Office 2000 SP-2 are:
1.2.1 Outlook 2000 SR-1a Security Update Administrative Tools
-----------------------------------------------
The Outlook 2000 SR-1 E-mail Security Update provides protection from most
e-mail viruses, such as the ILOVEYOU and Melissa viruses, as well as other
viruses that spread themselves through e-mail, or worm viruses that can
replicate through Outlook. For more information on this update, please go
to http://www.microsoft.com/office/ork/2000/appndx/toolbox.htm#secupd
1.2.2 Excel 2000 Security Update: REGISTER.ID
---------------------------------------------
The Microsoft Excel REGISTER.ID Security Update eliminates the
vulnerability that could be exploited using the worksheet tools of Excel
to do malicious acts, such as deleting and overwriting files without the
user's input or verification. For more information on this update, please
go to http://office.microsoft.com/en-us/assistance/HA011379221033.aspx
1.2.3 Office 2000 Security Update: HTML Data
--------------------------------------------
The Microsoft Office 2000 HTML Data Security Update eliminates a security
vulnerability in Word 2000, Excel 2000, and PowerPoint 2000. For more
information on this update, go to
http://www.microsoft.com/office/ork/2000/appndx/toolbox.htm#HTMLDtSc
1.2.4 Word 2000 Mail Merge Security Update
----------------------------------------
The Word 2000 Mail Merge Security Update protects you from a vulnerability
in the mail merge function in Word by increasing the security in the
connection between Word mail merge documents and Access databases. For
more information on this update, go to
http://www.microsoft.com/office/ork/2000/appndx/toolbox.htm#wrdacc
1.2.5 Excel/PowerPoint 2000 SR-1 Update: HTML Script Vulnerability
------------------------------------------------------------------
The Excel 2000 and PowerPoint 2000 SR-1 HTML Script Vulnerability Update
eliminates a security vulnerability in the Excel 2000 and PowerPoint 2000
object models that could expose them to unsafe scripts when a user views
a Web page or HTML e-mail message. For more information on this update,
go to http://www.microsoft.com/office/ork/2000/appndx/toolbox.htm -
xlpptaddin
1.2.6 Word 2000 Update: Proofing Tools Hyphenation
--------------------------------------------------
The Word 2000 Proofing Tools Hyphenation Update corrects an issue with the
hyphenation feature of the proofing tools so that it works properly with
long documents. For more information on this update, go to
http://office.microsoft.com/en-us/assistance/HA011379221033.aspx
1.2.7 Word 2000 SR-1 Update: Mail Command Security
--------------------------------------------------
Install the Word 2000 SR-1 Mail Command Security Update to eliminate a
security vulnerability that could allow a malicious hacker to send a virus
through e-mail by using the Word 2000 Visual Basic for Applications
command EmailSend. For more information on this update, go to
http://www.microsoft.com/office/ork/2000/appndx/toolbox.htm#wordmcsec
Microsoft Office 2000 SP-2 also includes various updates specifically
created for corporate customers. For additional information on these
updates, and on network and administration issues, please check the
Updates section in the Office Resource Kit Web site at:
http://www.microsoft.com/office/ork/
For further technical information on Office 2000 SP-2, go to:
http://support.microsoft.com/support/kb/articles/Q276/2/57.asp
2. INSTALLING MICROSOFT OFFICE 2000 SP-2
2.1 Applications That Microsoft Office 2000 SP-2 Can Be Applied to
--------------------------------------------------
You can only apply Microsoft Office 2000 SP-2 to the following applications:
Microsoft Office 2000 SR-1 Premium CD1
Microsoft Office 2000 SR-1 Professional CD1
Microsoft Office 2000 SR-1 Standard
Microsoft Office 2000 SR-1 Small Business CD1
Microsoft Outlook 2000 SR-1
Microsoft Access 2000 SR-1
Microsoft Excel 2000 SR-1
Microsoft Word 2000 SR-1
Microsoft FrontPage 2000 SR-1
Microsoft PowerPoint 2000 SR-1
Microsoft Access RunTime 2000 SR-1
If none of the above products are found on the system, a message appears
stating that the expected version of the product has not been found and
the installation process is terminated.
2.2 Updating Administrative Installation Points
-----------------------
Doubleclicking sp2admin.exe will extract the following four patch files
and a Word document to a directory you specify:
Sp2admin.msp
Out2kmst.msp
Pptmst.msp
Excelmst.msp
Readadm.doc
SP2admin.msp contains most of the changes that are included in the Office
2000 SP2 patch. In addition, the out2kmst.msp, pptmst.msp and
excelmst.msp files provide additional functionality for Outlook 2000,
PowerPoint 2000, and Excel 2000. To upgrade an Office 2000 SR-1
administrative installation point so that you have a clean Office 2000
SP-2 installation point, you need to apply all of the four patch files to
the Office 2000 SR-1 administrative installation point.
The following table illustrates when you need to apply each Office 2000
SP-2 patch file to an Office 2000 SR-1 administrative share point:
Patch name Apply patch?
Sp2admin.msp Always
Out2kmst.msp Always, unless the Outlook 2000 Security Patch has been
applied. Documented in Q235309 http://support.microsoft.com/support/kb/articles/Q235/3/09.asp
Pptmst.msp Always, unless the PowerPoint 2000 HTML Security update
has been applied. Documented in the following location:
http://www.microsoft.com/office/ork/2000/journ/ExcelPptScriptUpd_2.htm
Excelmst.msp Always, unless the patch for KB Q264719 has been applied.
Documented in the following location:
http://support.microsoft.com/support/kb/articles/Q276/2/57.asp
The modifications associated with the Out2kmst.msp, pptmst.msp and
excelmst.msp files could not be included in the sp2admin.msp file due
to a Windows Installer limitation described in the following KB article:
http://support.microsoft.com/support/kb/articles/q278/0/78.asp
If you have already applied the fixes contained in the out2kmst.msp, the
pptmst.msp and excelmst.msp files to the SR-1 administrative installation
point you are about to apply SP-2 to, then you cannot apply them again.
If you are not sure if the fixes have been applied to the SR-1
administrative installation point, follow the steps below to make sure
your SP-2 update is complete:
1. Apply the Sp2admin.msp file.
2. Apply the outmsk2st.msp file. If the code change contained in this
file was not applied previously, the patching process will complete
successfully. If the code change included in this msp file was applied
previously to the administrative installation point, the following error
will appear:
Internal Error 2250: Please contact product support for assistance.
Click on OK and proceed to the next step.
3. Apply the Pptmst.msp file. If the code change contained in this
file was not applied previously, the patching process will complete
successfully. If the code change included in this msp file was applied
previously to the administrative installation point, the following error
will appear:
Internal Error 2251: Please contact product support for assistance.
Click on OK and proceed to the next step.
4. Apply the Excelmst.msp file. If the code change contained in this
file was not applied previously, the patching process will complete
successfully. If the code change included in this msp file was applied
previously to the administrative installation point, the following error
will appear:
Internal Error 2251: Please contact product support for assistance.
Click on OK. The SP-2 update is now complete.
To extract all the files to the "c:\extract" directory from a command line,
type the following at a command prompt:
sp2admin.EXE /t:c:\extract /c
To apply each msp to an administrative installation point you need to use
the following command line:
[start] msiexec /p [path\name of update MSP file] /a
[path\name of MSI file] SHORTFILENAMES=TRUE /qb /L*v [path\name of log file]
Note: the verbose log file switch (/L*v) and the quiet mode switch (/qb)
are optional. See Office Resource Kit or Microsoft developer Network for
more information on msi command line switches.
Note: For best results the patch files should be applied from the console
of the machine containing the administrative installation point. Please
ensure that the files on the share point are not in use when the patches
are being applied. If there are multiple administrative installation
points, you may replace the remaining administrative installation points
with the updated administrative installation point after backing up any
custom transform, setup.ini or other files on the share points.
2.3 How to Update Your Workstations to SP-2
-------------------------------
Use one of the following methods to update workstations on which
Office 2000 SR-1 was already installed from your administrative
installation point.
Method 1:
Run Setup.exe from your administrative installation point at each
workstation.
Method 2:
Click Start, Run... and run the following command line from each
workstation:
msiexec /i <Admin Path>\Data1.msi reinstall=all reinstallmode=vomus
where <Admin Path> is the path to your administrative installation point
for Office 2000 SP-2.
2.4 How to Detect that the Update is Installed
----------------------------------------------
The updated file list with version numbers is as follows:
File Name Version
bjablr32.dll 1.0.3.27
bjlog32.dll 3.2.0.26
bjsrch32.dll 1.0.3.27
cag.exe 5.2.1.405
cdo.dll 5.5.2652.65
chapi3t1.dll 1.1.0.4130
contab32.dll 9.0.0.4506
Emablt32.dll 1.0.3.27
emsabp32.dll 5.5.3142.0
emsmdb32.dll 5.5.3144.0
emsui32.dll 5.5.3141.0
envelope.dll 9.0.0.4201
excel.exe 9.0.0.4430
exsec32.dll 5.5.3143.0
fp4awec.dll 4.0.2.4022
fpeditax.dll 4.0.2.4426
frontpg.exe 4.0.2.4426
graph9.exe 9.1.0.4207
mimedir.dll 9.0.0.4005
msaccess.exe 9.0.0.4506
msgr2en.lex Non versioned
msmapi32.dll 5.5.3145.0
mso9.dll 9.0.0.4402
msonsext.dll 9.0.0.4105
msowc.dll 9.0.0.4309
mspst32.dll 5.5.3138.0
msqry32.exe 9.0.0.4430
oladd.fae 9.0.0.3731
olsec9.chm Non versioned
olxchng9.aw Non versioned
olxchng9.chm Non versioned
omi9.dll 5.5.3134.0
omint.dll 5.5.3134.0
outex.dll 8.30.3145.0
outlhlp9.aw Non versioned
outllib.dll 9.0.0.4527
outllibr.dll 9.0.0.4527
photoed.exe 3.0.1.1
powerpnt.exe 9.0.0.4527
ppttools.ppa Non versioned
pstprx32.dll 9.0.4525.0
rm.dll 9.0.0.4307
sendto9.dll 9.0.0.4201
utility.mda Non versioned
vbe6.dll 6.0.89.67
winword.exe 9.0.0.4527
wrd6ex32.cnv 2000.3.16.0
ww9intl.dll 9.0.0.4527
Modification Type: | Major | Last Reviewed: | 4/17/2006 |
---|
Keywords: | kbinfo KB279179 |
---|
|