FS2000: Differences Between True Air Speed and Indicated Air Speed (264616)



The information in this article applies to:

  • Microsoft Flight Simulator 2000
  • Microsoft Flight Simulator 2000 Professional Edition

This article was previously published under Q264616

SUMMARY

This article describes true air speed, indicated air speed, and how to derive true air speed from indicated air speed based on altitude.

MORE INFORMATION

True Air Speed

True air speed is the actual speed at which an aircraft moves from one point to another. True air speed can be affected by the altitude of the aircraft, but in most cases the effect is minimal because most aircraft fly at a maximum altitude of seven to nine miles. Some large aircraft can fly at higher altitudes. For example, the Concorde can fly at a maximum altitude of approximately eleven miles.

Indicated Air Speed

The air speed displayed on the Air Speed Indicator on the instrument panel in your aircraft is the indicated air speed. Indicated air speed is the speed at which an aircraft moves through the air, and it can be affected significantly by altitude and wind direction.

The Air Speed Indicator works by comparing the air pressure inside the Pilot Tube to the air pressure inside the aircraft cabin. The Pilot Tube is a hollow probe that points directly forward into the oncoming air.

Changes in altitude can affect indicated air speed. As the altitude of the aircraft increases, the air pressure in the Pilot Tube decreases, causing the indicated air speed to decrease.

Assuming no effects from wind, the following table lists the true air speed in nautical miles-per-hour (knots) for an aircraft traveling at 400 knots at altitudes between 1000 feet and 25000 feet.

AltitudeIndicated air speedTrue air speed
1000 feet400405
4000 feet400421.7
8000 feet400445
10000 feet400457.2
15000 feet400489.1
18000 feet400510.1
22000 feet400539.4
24000 feet400554.7
25000 feet400562.2

Modification Type:MajorLast Reviewed:10/6/2003
Keywords:kbinfo kbref KB264616