Video problems when you select the TV Out video adapter in Motocross Madness 2 (261026)
The information in this article applies to:
- Microsoft Motocross Madness 2 2.0
This article was previously published under Q261026 SYMPTOMS When you select the TV Out video adapter when you start
Microsoft Motocross Madness 2, you may experience the following symptoms:
- You may not be able to change the display resolution on the
Graphics Options screen.
- Motocross Madness 2 may stop responding (hang) when you try
to start a race.
CAUSE This issue may occur if your video adapter is based on the
nVIDIA GeForce 256 GPU chip set. RESOLUTION To prevent this issue from occurring, do not select the TV
Out video adapter when you start Motocross Madness 2. To identify
the manufacturer and model of your video adapter:
- Click Start, point to Settings, and then click Control Panel.
- Double-click System.
- If you are using a Microsoft Windows 95-based or a Windows
98-based computer, click the Device Manager tab.
If you are using a Windows 2000-based computer,
click the Hardware tab, and then click Device Manager. - Click the plus sign (+) next to Display adapters to expand the branch.
- Under the Display adapters branch, note the manufacturer and model of your video adapter,
and then click OK.
- Close all open windows.
Modification Type: | Major | Last Reviewed: | 5/19/2004 |
---|
Keywords: | kb3rdparty kbgraphic kbHardware kbprb kbui KB261026 |
---|
|