Some WMI Properties and Methods Are Not Published in the Directory Service Schema (260937)

SYMPTOMS

In Windows Management Instrumentation (WMI), the following properties and methods are not listed:

Schema as defined:

[Read: ToSubClass,

Description ( "The FullDNSRegistrationEnabled property specifies whether the IP addresses for this connection are registered "
"in DNS under the computer's full DNS name. The full DNS name of the computer "
"is displayed on the Network Identification tab of the System Control Panel. "
"Windows 2000 only."
): ToSubClass ]
boolean FullDNSRegistrationEnabled ;

[Read: ToSubClass,
Description ( "The DomainDNSRegistrationEnabled property specifies whether the IP addresses for this connection are registered "
"in DNS under the domain name of this connection, in addition to registering "
"under the computer's full DNS name. The domain name of this connection is "
"either set via the method SetDNSDomain() or assigned by DHCP. The registered "
"name is the host name of the computer with the domain name appended. "
"Windows 2000 only."

): ToSubClass ]
boolean DomainDNSRegistrationEnabled ;

[Read: ToSubClass,
Description("The IPConnectionMetric indicates the cost of using the configured "
"routes for this IP bound adapter and is the weighted value for those routes "
"in the IP routing table. If there are multiple routes to a destination "
"in the IP routing table, the route with the lowest metric is used. "
"The default value is 1."
"Windows 2000 only."
): ToSubClass ]

uint32 IPConnectionMetric;

[read: ToSubClass,
Description ("The TcpipNetbiosOptions property specifies a bitmap "
"of the possible settings related to NetBIOS over TCP/IP. "
"Windows 2000 only."): ToSubClass,

BitValues { "EnableNetbiosViaDhcp",
"EnableNetbios",
"DisableNetbios"
}: ToSubClass

]
uint32 TcpipNetbiosOptions ;

[Implemented: ToSubClass,
Description ("The SetDynamicDNSRegistration method is used to indicate "
"dynamic DNS registration of IP addresses for this IP bound adapter. "
"The method returns 0 on success, and any other number to indicate an error."
"Windows 2000 only."): ToSubClass]
uint32 SetDynamicDNSRegistration (

[In: ToSubClass,
Description ( "The FullDNSRegistrationEnabled parameter specifies whether the IP addresses for this connection are registered "
"in DNS under the computer's full DNS name. The full DNS name of the computer "
"is displayed on the Network Identification tab of the System Control Panel. "

"Windows 2000 only."
): ToSubClass ]
boolean FullDNSRegistrationEnabled,

[In: ToSubClass, Optional: ToSubClass,
Description ( "The DomainDNSRegistrationEnabled parameter specifies whether the IP addresses for this connection are registered "
"in DNS under the domain name of this connection, in addition to registering "
"under the computer's full DNS name. The domain name of this connection is "
"either set via the method SetDNSDomain() or assigned by DHCP. The registered "
"name is the host name of the computer with the domain name appended. "
"This parameter has meaning only when FullDNSRegistrationEnabled is enabled. "
"Default: FALSE. Windows 2000 only."
): ToSubClass ]
boolean DomainDNSRegistrationEnabled

); // end SetDynamicDNSRegistration method
[Implemented: ToSubClass,
Description ("The SetIPConnectionMetric method is used to set the routing metric "
"associated with this IP bound adapter. The method returns 0 on success, "
" and any other number to indicate an error."
"Windows 2000 only."): ToSubClass]
uint32 SetIPConnectionMetric (

[In: ToSubClass,
Description("The IPConnectionMetric parameter assigns an value "
"ranging from 1 to 9999, and indicates the cost of using the configured "
"routes for this IP bound adapter and is the weighted value for those routes "
"in the IP routing table. If there are multiple routes to a destination "
"in the IP routing table, the route with the lowest metric is used. "

"The default value is 1. Windows 2000 only."
): ToSubClass ]
uint32 IPConnectionMetric

); // end SetIPConnectionMetric method

[Implemented: ToSubClass,
Description ("The SetTcpipNetbios method is used to set the default "
"operation of NetBIOS over TCP/IP. Windows 2000 only. " ): ToSubClass

]
uint32 SetTcpipNetbios (
[In: ToSubClass,
Description ("The TcpipNetbiosOptions parameter specifies a bitmap "
"of the possible settings related to NetBIOS over TCP/IP."
): ToSubClass,
BitValues { "EnableNetbiosViaDhcp",
"EnableNetbios",
"DisableNetbios"

}: ToSubClass
]
uint32 TcpipNetbiosOptions

); // end SetTcpipNetbios method