Works Word Processor: Characters Overlap and Appear Jumbled (252874)
The information in this article applies to:
- Microsoft Works Suite 99
- Microsoft Works 2000
- Microsoft Works 6
This article was previously published under Q252874 SYMPTOMS
When you use the Microsoft Works Word Processor, you may experience the following symptoms:
- Characters that you type overlap one another and appear jumbled.
- Characters overlap one another and appear jumbled when you open a Works Word Processor document.
CAUSE
This behavior can occur if the printer driver for your printer is outdated. Or your printer may be a dot matrix printer, and you are using high resolution settings.
RESOLUTION
To resolve this issue, use the following methods in the order in which they are presented.
Install the Latest Printer Driver for Your Printer
To inquire about how to obtain and install the latest printer driver for your printer, contact the manufacturer of your printer. For information about how to contact the manufacturer of your printer, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base: 65416 Hardware and Software Third-Party Vendor Contact List, A-K
60781 Hardware and Software Third-Party Vendor Contact List, L-P
60782 Hardware and Software Third-Party Vendor Contact List, Q-Z Configure Your Printer to Emulate Another Printer
To configure your printer to emulate a different printer, consult your printer manual, or contact the manufacturer of your printer.
Install a Compatible Printer Driver
To install a compatible printer driver, contact the manufacturer of your printer.
Change the Resolution to your Dot Matrix Printer- Click Start, point to Settings, and then click Printers.
- Right-click the printer, and then click Properties.
- Click the Graphics tab.
- In the Resolution field, change the settings to 120 x 144.
- Click OK.
| Modification Type: | Major | Last Reviewed: | 11/13/2003 |
|---|
| Keywords: | kb3rdparty kbdisplay kbprb kbui KB252874 |
|---|
|