Windows 2000 Setup Seems to Hang on Compaq Servers (249686)
The information in this article applies to:
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows 2000 Professional
This article was previously published under Q249686 SYMPTOMS
When you are installing Windows 2000 on a Compaq server, Setup may seem to stop responding (hang) during the GUI-mode portion of the installation because the keyboard and mouse stop responding.
CAUSE
This behavior occurs on Compaq servers that contain a Compaq System Configuration utility version earlier than 2.48.
Although versions earlier than 2.48 may include an operating system selection to install Windows 2000, it is not compatible. Newer versions of the System Configuration utility enable the hardware functionality needed for Windows 2000 to operate correctly.
RESOLUTION
Refer to Compaq's 1187-1099a-wwen white paper on preparing servers for Windows 2000, and ensure that the operating system is configured as Windows 2000. To view the white paper, visit the following Compaq Web site:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Changing your operating system selection to Windows 2000 in the System Configuration utility enables the following settings:
- APIC Mode = Full Table
- Hot Plug Reservation Mode = Extensive (for SMART-2 Array controllers) or = Normal (for all types of PCI controllers)
Modification Type: | Major | Last Reviewed: | 11/20/2003 |
---|
Keywords: | kbenv kbHardware kbprb kbsetup w2000setup KB249686 |
---|
|