Trace Viewer Incorrectly Formats Print Output (246482)


The information in this article applies to:

  • Microsoft SNA Server 3.0
  • Microsoft SNA Server 3.0 SP1
  • Microsoft SNA Server 3.0 SP2
  • Microsoft SNA Server 3.0 SP3
  • Microsoft SNA Server 3.0 SP4
  • Microsoft SNA Server 4.0
  • Microsoft SNA Server 4.0 SP1
  • Microsoft SNA Server 4.0 SP2
  • Microsoft SNA Server 4.0 SP3
This article was previously published under Q246482

SYMPTOMS

When using the Trace Viewer (Tracevwr.exe) tool to print traces obtained by the SNA Trace Utility, the output data is truncated once the print job is complete. Enabling or disabling the various trace filter options within the Trace Viewer tool does not remedy the problem.

CAUSE

Trace Viewer does not properly format the print output.

WORKAROUND

Convert the trace file from its native format (.atf) to either Text or Delimited Text format by using the 'File\Save As...' menu option. The saved file can then be opened from within a text editor and printed.

STATUS

Microsoft has confirmed that this is a problem in Microsoft SNA Server, versions 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 3.0 SP4, 4.0, 4.0 SP1, 4.0 SP2, 4.0 SP3.
Modification Type:MinorLast Reviewed:7/15/2004
Keywords:KB246482
©2004 Microsoft Corporation. All rights reserved.