Err Msg: 16 Bit Audio Drive Alert. The VSGLX16.386 Driver Is... (237749)
The information in this article applies to:
- Microsoft Windows 98
- Microsoft Windows 95
This article was previously published under Q237749 If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware: SYMPTOMS
When you start your computer, you may receive one of the following error messages:
Unable to locate and initialize VSGLX16.386 for 16 bit audio board hardware. This drive is not present or failed to load. Check hardware configuration.
16 Bit Audio Drive Alert. The VSGLX16.386 driver is not present or failed to load. Check hardware configuration, run Setup to reconfigure driver if necessary, then restart your system.
CAUSE
This behavior can occur if you replace the Sound Galaxy Nova-16 Extra II (or similar) sound card/modem in your Packard Bell computer with another modem or sound card.
RESOLUTION
To resolve this behavior, use the Microsoft System Configuration Utility (Sysedit) to edit the System.ini file. To do this, follow these steps:
- Click Start, click Run, type sysedit, and then click OK.
- On the Window menu, click System.ini.
- In the [386 Enhanced] section, type a semicolon (;) at the beginning of the following line:
- In the [Drivers] section, type a semicolon (;) at the beginning of each of the following lines:
- Wave=mm16w.drv
- AUX=mm16w.drv
- Midi=mm16w.drv
- Mixer=mm16w.drv
- Midi1=sapi!opl.drv
- Type a semicolon at the beginning of the [Mm16.drv] section if it exists.
- On the File menu, click Exit, and then click Yes to save the changes.
- Restart your computer.
| Modification Type: | Major | Last Reviewed: | 8/8/2006 |
|---|
| Keywords: | kb3rdparty kbenv kberrmsg kbprb kbsound KB237749 |
|---|
|