FP2000: Error Message: Could Not Find a Web Server at '<ftp location>' (223377)


The information in this article applies to:

  • Microsoft FrontPage 2000
This article was previously published under Q223377
For a Microsoft FrontPage 2002 version of this article, see 319514.

SYMPTOMS

When you use File Transfer Protocol (FTP) to publish through an HTTP proxy server, you may receive the following error message:
Could not find a Web server at 'ftp location'. Please check to make sure that the Web server name is valid and your proxy settings are set correctly. If you are sure that everything is correct, the Web server may be temporarily out of service.

CAUSE

Your HTTP Proxy Server permits only read access to FTP sites. FrontPage must be able to use the FTP protocol for both reading and writing when it publishes to FTP servers.

RESOLUTION

To resolve this problem, use either a Winsock Proxy client or an FTP Gateway.

To Use Microsoft Winsock Proxy Clients

Microsoft Internet Security and Acceleration Server and Microsoft Proxy Server technologies provide a Winsock Proxy client that allows read and write access through a proxy server.

For more information about these products, please visit the following Microsoft Web sites:

Microsoft Internet Security and Acceleration Server

Microsoft Proxy Server 2.0

To Use an FTP Gateway

An FTP Gateway permits read and write access by acting as a translator for FTP requests. (To see if your network has an FTP gateway installed, please ask your network administrator.)

To configure your Internet Options to use an FTP Gateway, follow the appropriate steps for your version of Microsoft Internet Explorer.

If You Have Internet Explorer 5.x or 6.x Installed

  1. Open Control Panel.
  2. Double-click Internet Options.
  3. Click the Connections tab.
  4. Click LAN Settings.
  5. Click Advanced.
  6. Click to clear the Use the same proxy server for all protocols check box.
  7. In the FTP and Port boxes, specify the protocol, the FTP server location, and the port number, for example:

    ftp://server location:21

  8. Click OK three times.

If You Have Internet Explorer 4.x Installed

  1. Open Control Panel.
  2. Double-click Internet Options.
  3. Click the Connection tab.
  4. Click Advanced.
  5. Click to clear the Use the same proxy server for all protocols check box.
  6. In the FTP and Port boxes, specify the protocol, the FTP server location, and the port number, for example:

    ftp://server location:21

  7. Click OK two times.

MORE INFORMATION

For more information about how to publish with FrontPage, click Microsoft FrontPage Help on the Help menu, type publish in the Office Assistant or the Answer Wizard, and then click Search to view the topics returned.
Modification Type:MajorLast Reviewed:8/6/2002
Keywords:kbprb KB223377
©2002 Microsoft Corporation. All rights reserved.