PPT2000: Sample Code Displays Message Box With AutoShape Type Name (222728)


The information in this article applies to:

  • Microsoft PowerPoint 2000
This article was previously published under Q222728

SUMMARY

This article contains a sample Microsoft Visual Basic for Applications macro (Sub procedure) that retrieves the shape type for a selected AutoShape object and then displays a message box with the name of the shape type.

MORE INFORMATION

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements. NOTE: The following macro examples work only in PowerPoint. Visual Basic for Applications macros are not supported by the Microsoft PowerPoint Viewer. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:

Sample Visual Basic Procedure

   Sub GetAutoShapeName()

      ' Dimension the variables.
      Dim strAutoShape As String
      Dim lCurrentSlide As Long
      Dim lCurrentView As Long
      Dim oShape As Shape

      ' Determine what the current slide view is.
      lCurrentView = ActiveWindow.ViewType

      ' See whether in slide view.
      If lCurrentView <> ppViewSlide Then

         ' Display error message.
         MsgBox "This macro is designed to be run in slide view. " _
            & "Switch to slide view, select a shape and run the " _
            & "macro again. ", vbExclamation, "Invalid View"

         ' Stop the macro.
         End

      End If

      ' Check to make sure something is selected.
      If ActiveWindow.Selection.Type = ppSelectionNone Then

         ' Display error message box.
         MsgBox "No objects are selected. Please select one object " _
            & "and run the macro again.", vbExclamation

         ' End the macro.
         End

      End If

      ' Get the current slide number.
      lCurrentSlide = ActiveWindow.Selection.SlideRange.SlideNumber

      ' See whether more than one shape is selected.
      If ActiveWindow.Selection.ShapeRange.Count > 1 Then

         ' Display error message.
         MsgBox "Too many objects selected. Please select one object " _
            & "and run the macro again.", vbExclamation

         ' Stop the macro.
         End

      End If

      ' Get reference to selected shape.
      Set oShape = ActiveWindow.Selection.ShapeRange(1)

      ' Determine the type of autoshape.
      Select Case oShape.AutoShapeType

         Case msoShape16pointStar
            strAutoShape = "16pointStar"
         Case msoShape24pointStar
            strAutoShape = "24point Star"
         Case msoShape32pointStar
            strAutoShape = "32pointStar"
         Case msoShape4pointStar
            strAutoShape = "4pointStar"
         Case msoShape5pointStar
            strAutoShape = "5pointStar"
         Case msoShape8pointStar
            strAutoShape = "8pointStar"
         Case msoShapeActionButtonBackorPrevious
            strAutoShape = "ActionButtonBackorPrevious"
         Case msoShapeActionButtonBeginning
            strAutoShape = "ActionButtonBeginning"
         Case msoShapeActionButtonCustom
            strAutoShape = "ActionButtonCustom"
         Case msoShapeActionButtonDocument
            strAutoShape = "ShapeActionButtonDocument"
         Case msoShapeActionButtonEnd
            strAutoShape = "ActionButtonEnd"
         Case msoShapeActionButtonForwardorNext
            strAutoShape = "ActionButtonForwardorNext"
         Case msoShapeActionButtonHelp
            strAutoShape = "ActionButtonHelp"
         Case msoShapeActionButtonHome
            strAutoShape = "ActionButtonHome"
         Case msoShapeActionButtonInformation
            strAutoShape = "ActionButtonInformation"
         Case msoShapeActionButtonMovie
            strAutoShape = "ActionButtonMovie"
         Case msoShapeActionButtonReturn
            strAutoShape = "ActionButtonReturn"
         Case msoShapeActionButtonSound
            strAutoShape = "ActionButtonSound"
         Case msoShapeArc
            strAutoShape = "Arc"
         Case msoShapeBalloon
            strAutoShape = "Balloon"
         Case msoShapeBentArrow
            strAutoShape = "BentArrow"
         Case msoShapeBentUpArrow
            strAutoShape = "BentUpArrow"
         Case msoShapeBevel
            strAutoShape = "Bevel"
         Case msoShapeBlockArc
            strAutoShape = "BlockArc"
         Case msoShapeCan
            strAutoShape = "Can"
         Case msoShapeChevron
            strAutoShape = "Chevron"
         Case msoShapeCircularArrow
            strAutoShape = "CircularArrow"
         Case msoShapeCloudCallout
            strAutoShape = "CloudCallout"
         Case msoShapeCross
            strAutoShape = "Cross"
         Case msoShapeCube
            strAutoShape = "Cube"
         Case msoShapeCurvedDownArrow
            strAutoShape = "CurvedDownArrow"
         Case msoShapeCurvedDownRibbon
            strAutoShape = "CurvedDownRibbon"
         Case msoShapeCurvedLeftArrow
            strAutoShape = "CurvedLeftArrow"
         Case msoShapeCurvedRightArrow
            strAutoShape = "CurvedRightArrow"
         Case msoShapeCurvedUpArrow
            strAutoShape = "CurvedUpArrow"
         Case msoShapeCurvedUpRibbon
            strAutoShape = "CurvedUpRibbon"
         Case msoShapeDiamond
            strAutoShape = "Diamond"
         Case msoShapeDonut
            strAutoShape = "Donut"
         Case msoShapeDoubleBrace
            strAutoShape = "DoubleBrace"
         Case msoShapeDoubleBracket
            strAutoShape = "DoubleBracket"
         Case msoShapeDoubleWave
            strAutoShape = "DoubleWave"
         Case msoShapeDownArrow
            strAutoShape = "DownArrow"
         Case msoShapeDownArrowCallout
            strAutoShape = "DownArrowCallout"
         Case msoShapeDownRibbon
            strAutoShape = "DownRibbon"
         Case msoShapeExplosion1
            strAutoShape = "Explosion1"
         Case msoShapeExplosion2
            strAutoShape = "Explosion2"
         Case msoShapeFlowchartAlternateProcess
            strAutoShape = "FlowchartAlternateProcess"
         Case msoShapeFlowchartCard
            strAutoShape = "FlowchartCard"
         Case msoShapeFlowchartCollate
            strAutoShape = "FlowchartCollate"
         Case msoShapeFlowchartConnector
            strAutoShape = "FlowchartConnector"
         Case msoShapeFlowchartData
            strAutoShape = "FlowchartData"
         Case msoShapeFlowchartDecision
            strAutoShape = "FlowchartDecision"
         Case msoShapeFlowchartDelay
            strAutoShape = "FlowchartDelay"
         Case msoShapeFlowchartDirectAccessStorage
            strAutoShape = "FlowchartDirectAccessStorage"
         Case msoShapeFlowchartDisplay
            strAutoShape = "FlowchartDisplay"
         Case msoShapeFlowchartDocument
            strAutoShape = "FlowchartDocument"
         Case msoShapeFlowchartExtract
            strAutoShape = "FlowchartExtract"
         Case msoShapeFlowchartInternalStorage
            strAutoShape = "FlowchartInternalStorage"
         Case msoShapeFlowchartMagneticDisk
            strAutoShape = "FlowchartMagneticDisk"
         Case msoShapeFlowchartManualInput
            strAutoShape = "FlowchartManualInput"
         Case msoShapeFlowchartManualOperation
            strAutoShape = "FlowchartManualOperation"
         Case msoShapeFlowchartMerge
            strAutoShape = "FlowchartMerge"
         Case msoShapeFlowchartMultidocument
            strAutoShape = "FlowchartMultidocument"
         Case msoShapeFlowchartOffpageConnector
            strAutoShape = "FlowchartOffpageConnector"
         Case msoShapeFlowchartOr
            strAutoShape = "FlowchartOr"
         Case msoShapeFlowchartPredefinedProcess
            strAutoShape = "FlowchartPredefinedProcess"
         Case msoShapeFlowchartPreparation
            strAutoShape = "FlowchartPreparation"
         Case msoShapeFlowchartProcess
            strAutoShape = "FlowchartProcess"
         Case msoShapeFlowchartPunchedTape
            strAutoShape = "FlowchartPunchedTape"
         Case msoShapeFlowchartSequentialAccessStorage
            strAutoShape = "FlowchartSequentialAccessStorage"
         Case msoShapeFlowchartSort
            strAutoShape = "FlowchartSort"
         Case msoShapeFlowchartStoredData
            strAutoShape = "FlowchartStoredData"
         Case msoShapeFlowchartSummingJunction
            strAutoShape = "FlowchartSummingJunction"
         Case msoShapeFlowchartTerminator
            strAutoShape = "FlowchartTerminator"
         Case msoShapeFoldedCorner
            strAutoShape = "FoldedCorner"
         Case msoShapeHeart
            strAutoShape = "Heart"
         Case msoShapeHexagon
            strAutoShape = "Hexagon"
         Case msoShapeHorizontalScroll
            strAutoShape = "HorizontalScroll"
         Case msoShapeIsoscelesTriangle
            strAutoShape = "IsoscelesTriangle"
         Case msoShapeLeftArrow
            strAutoShape = "LeftArrow"
         Case msoShapeLeftArrowCallout
            strAutoShape = "LeftArrowCallout"
         Case msoShapeLeftBrace
            strAutoShape = "LeftBrace"
         Case msoShapeLeftBracket
            strAutoShape = "LeftBracket"
         Case msoShapeLeftRightArrow
            strAutoShape = "LeftRightArrow"
         Case msoShapeLeftRightArrowCallout
            strAutoShape = "LeftRightArrowCallout"
         Case msoShapeLeftRightUpArrow
            strAutoShape = "LeftRightUpArrow"
         Case msoShapeLeftUpArrow
            strAutoShape = "LeftUpArrow"
         Case msoShapeLightningBolt
            strAutoShape = "LightningBolt"
         Case msoShapeLineCallout1
            strAutoShape = "LineCallout1"
         Case msoShapeLineCallout1AccentBar
            strAutoShape = "LineCallout1AccentBar"
         Case msoShapeLineCallout1BorderandAccentBar
            strAutoShape = "LineCallout1BorderandAccentBar"
         Case msoShapeLineCallout1NoBorder
            strAutoShape = "LineCallout1NoBorder"
         Case msoShapeLineCallout2
            strAutoShape = "LineCallout2"
         Case msoShapeLineCallout2AccentBar
            strAutoShape = "LineCallout2AccentBar"
         Case msoShapeLineCallout2BorderandAccentBar
            strAutoShape = "LineCallout2BorderandAccentBar"
         Case msoShapeLineCallout2NoBorder
            strAutoShape = "LineCallout2NoBorder"
         Case msoShapeLineCallout3
            strAutoShape = "LineCallout3"
         Case msoShapeLineCallout3AccentBar
            strAutoShape = "LineCallout3AccentBar"
         Case msoShapeLineCallout3BorderandAccentBar
            strAutoShape = "LineCallout3BorderandAccentBar"
         Case msoShapeLineCallout3NoBorder
            strAutoShape = "LineCallout3NoBorder"
         Case msoShapeLineCallout4
            strAutoShape = "LineCallout4"
         Case msoShapeLineCallout4AccentBar
            strAutoShape = "LineCallout4AccentBar"
         Case msoShapeLineCallout4BorderandAccentBar
            strAutoShape = "LineCallout4BorderandAccentBar"
         Case msoShapeLineCallout4NoBorder
            strAutoShape = "LineCallout4NoBorder"
         Case msoShapeMixed
            strAutoShape = "Mixed"
         Case msoShapeMoon
            strAutoShape = "Moon"
         Case msoShapeNoSymbol
            strAutoShape = "NoSymbol"
         Case msoShapeNotchedRightArrow
            strAutoShape = "NotchedRightArrow"
         Case msoShapeNotPrimitive
            strAutoShape = "NotPrimitive"
         Case msoShapeOctagon
            strAutoShape = "Octagon"
         Case msoShapeOval
            strAutoShape = "Oval"
         Case msoShapeOvalCallout
            strAutoShape = "OvalCallout"
         Case msoShapeParallelogram
            strAutoShape = "Parallelogram"
         Case msoShapePentagon
            strAutoShape = "Pentagon"
         Case msoShapePlaque
            strAutoShape = "Plaque"
         Case msoShapeQuadArrow
            strAutoShape = "QuadArrow"
         Case msoShapeQuadArrowCallout
            strAutoShape = "QuadArrowCallout"
         Case msoShapeRectangle
            strAutoShape = "Rectangle"
         Case msoShapeRectangularCallout
            strAutoShape = "RectangularCallout"
         Case msoShapeRegularPentagon
            strAutoShape = "RegularPentagon"
         Case msoShapeRightArrow
            strAutoShape = "RightArrow"
         Case msoShapeRightArrowCallout
            strAutoShape = "RightArrowCallout"
         Case msoShapeRightBrace
            strAutoShape = "RightBrace"
         Case msoShapeRightBracket
            strAutoShape = "RightBracket"
         Case msoShapeRightTriangle
            strAutoShape = "RightTriangle"
         Case msoShapeRoundedRectangle
            strAutoShape = "RoundedRectangle"
         Case msoShapeRoundedRectangularCallout
            strAutoShape = "RoundedRectangularCallout"
         Case msoShapeSmileyFace
            strAutoShape = "SmileyFace"
         Case msoShapeStripedRightArrow
            strAutoShape = "StripedRightArrow"
         Case msoShapeSun
            strAutoShape = "Sun"
         Case msoShapeTrapezoid
            strAutoShape = "Trapezoid"
         Case msoShapeUpArrow
            strAutoShape = "UpArrow"
         Case msoShapeUpArrowCallout
            strAutoShape = "UpArrowCallout"
         Case msoShapeUpDownArrow
            strAutoShape = "UpDownArrow"
         Case msoShapeUpDownArrowCallout
            strAutoShape = "UpDownArrowCallout"
         Case msoShapeUpRibbon
            strAutoShape = "UpRibbon"
         Case msoShapeUTurnArrow
            strAutoShape = "UTurnArrow"
         Case msoShapeVerticalScroll
            strAutoShape = "VerticalScroll"
         Case msoShapeWave
            strAutoShape = "ShapeWave"
         Case Else
            strAutoShape = "Not an AutoShape"

      End Select

      ' Display information sheet.
      MsgBox strAutoShape, vbInformation, "Auto Shape Name"

   End Sub

REFERENCES

For more information about how to use the sample code in this article, click the article number below to view the article in the Microsoft Knowledge Base:

212536 OFF2000: How to Run Sample Code from Knowledge Base Articles

Modification Type:MinorLast Reviewed:10/11/2006
Keywords:kbcode kbdtacode kbhowto kbmacro kbProgramming KB222728
©2004 Microsoft Corporation. All rights reserved.