Problems Using Xircom CE3 Network Adapter (217060)


The information in this article applies to:

  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Professional
This article was previously published under Q217060

SYMPTOMS

When you use an early version of the Xircom CE3 network adapter, you may experience any of the following symptoms:
  • During a large file transfer, network connectivity is lost. Connectivity can be established again by removing and reinserting the network adapter.
  • If the network adapter is inserted without a cable attached, CPU usage goes to maximum, causing the computer to stop responding (hang).
  • The network appears to be connected even without a cable attached.

CAUSE

This behavior can occur if you are using a Xircom CE3 network adapter revision 0340C or earlier. Note that on most Xircom cards, you can view the firmware revision by looking at the serial number sticker on the card.

RESOLUTION

Please contact Xircom to inquire about obtaining a replacement adapter.
Modification Type:MajorLast Reviewed:11/13/2003
Keywords:kbHardware kbnetwork kbprb KB217060
©2003 Microsoft Corporation. All rights reserved.