Specifying Third-Party SCSI, CD-ROM, or Special Disk Controller Driver During Setup (216406)



The information in this article applies to:

  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Professional
  • Microsoft Windows 2000 Datacenter Server

This article was previously published under Q216406

SUMMARY

Specifying a third-party controller driver during Setup should be necessary only if Windows 2000 does not contain a driver for your SCSI adapter, CD-ROM drive, or special disk controller, or if Setup does not detect your hardware correctly.

MORE INFORMATION

To select a third-party controller during Setup:
  1. During the first phase of Setup, at the "Setup is inspecting your computer's hardware configuration" screen, press the F6 key.
  2. Press S to specify an additional driver. You are prompted for the manufacturer-supplied disk.
  3. After all additional drivers have been specified, press ENTER to continue with Setup.

Modification Type:MajorLast Reviewed:11/21/2003
Keywords:kbHardware kbhowto kbsetup KB216406