XL98: 3-D Surface Chart Lines May Not Follow Slope of Data (200849)
The information in this article applies to:
- Microsoft Excel 98 Macintosh Edition
This article was previously published under Q200849 SYMPTOMS
When you create a 3-D surface chart, it may have unexpected peaks or valleys and may not be as smooth as expected.
CAUSE
This problem may occur when any of the following conditions are true:
- The data is not part of a regular sequential series.
-or- - The data is not derived from mathematical formulas.
-or- - The major unit on the scale is different from the increments in the
data.
STATUSMicrosoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. MORE INFORMATION
The points and plot of each data point on the grid seem to be correct, but the way they are connected between points creates patterns that are often not as smooth as expected. This is most often observable when the chart is a surface type with a contour sub-type.
| Modification Type: | Major | Last Reviewed: | 9/11/2002 |
|---|
| Keywords: | kbbug KB200849 |
|---|
|