How to Configure Direct Cable Connection for Optimal Performance (195240)


The information in this article applies to:

  • Microsoft Windows 98
  • Microsoft Windows 95
  • Microsoft Windows Millennium Edition
This article was previously published under Q195240

SUMMARY

This article describes how to configure the Direct Cable Connection tool for optimal performance across a serial-port connection.

MORE INFORMATION

To configure the Direct Cable Connection tool for optimal performance across a serial-port connection, configure your Serial Cable device in Device Manager to a high speed. To do so, use the following steps:

NOTE: The following procedure must be performed on both the Host and the Client computers.

  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click System, click the Device Manager tab, double-click the Modems branch to expand it, click Serial Cable On COM<serial port number> where <serial port number> is the number of the COM port to which the serial cable is connected, and then click Properties.
  3. Click the Modem tab, and then configure the Maximum Speed up to 115,200.
  4. Click OK, click OK, and then restart your computer.
Modification Type:MinorLast Reviewed:12/16/2004
Keywords:kbinfo kbnetwork KB195240
©2004 Microsoft Corporation. All rights reserved.