Computer Stops Responding During Power On Self Test (192757)
The information in this article applies to:
This article was previously published under Q192757 If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware: SYMPTOMS
You may experience the following symptoms:
- When you start your computer, it stops responding (hangs) during Power
On Self Test (POST).
- When you try to load drivers for an Epson ES-600C scanner in Windows
98, your computer prematurely restarts during device enumeration and
then hangs during POST.
CAUSE
Either of these issues can occur if you are using an Adaptec AHA-2940
Small Computer System Interface (SCSI) adapter with a SCSI Epson ES-600C
scanner.
RESOLUTION
To resolve these issues, contact Epson Technical Support.
MORE INFORMATION
Epson does not support using a SCSI Epson ES-600C scanner with an Adaptec
AHA-2940 SCSI adapter.
| Modification Type: | Major | Last Reviewed: | 7/13/2006 |
|---|
| Keywords: | kbHardware kbprb KB192757 |
|---|
|