Digital Video Device Not Capturing Video with Adaptec AHA-8940 (192172)


The information in this article applies to:

  • Microsoft Windows 98
This article was previously published under Q192172
If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware:

http://support.microsoft.com/default.aspx/w98?sid=460

SYMPTOMS

If you use a digital video capture device, you may not be able to use the capture feature.

CAUSE

This issue can occur if you are using an Adaptec AHA-8940 1394 PCI host adapter and the Windows 98 driver for the Adaptec host adapter.

RESOLUTION

To work around this issue, replace the Windows 98 driver with the Adaptec driver provided with the host adapter.

To remove the Windows 98 driver, follow these steps:

  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click System, and then click the Device Manager tab.
  3. Double-click the SCSI Controllers branch to expand it, and then click Adaptec AHA-8940 1394 PCI Host Adapter.
  4. Click Remove, click OK, and then click Yes.
For information about how to install Adaptec drivers, consult the host adapter's documentation or manufacturer.

MORE INFORMATION

For additional information about video capture cards and the Windows Driver Model (WDM), please refer to the following article in the Microsoft Knowledge Base:

ARTICLE-ID: 192112
TITLE : Video Capture WDM Driver Does Not Work in Windows 98

Modification Type:MajorLast Reviewed:7/13/2006
Keywords:kbenv kbHardware kbprb KB192172
©2004 Microsoft Corporation. All rights reserved.