SUMMARY
Terminal Server Clients use TCP port 3389 to communicate with Terminal
Server. A common problem in a WAN environment is that a firewall or
other network filter prevents connectivity with this port. You can run a
simple troubleshooting test to make sure the Client can connect to the
port. Just try to telnet to the port from the Client.
To test the functionality of port 3389, use this command from the Client:
Telnet tserv 3389
where "tserv" is the host name of your Terminal Server.
If telnet is successful, you simply receive the telnet screen and a cursor.
On the Terminal Server, Terminal Server Administration will show a blue
computer icon with no other information. The Telnet connection will also
consume an idle session.
The Terminal Server should disconnect the connection after a few minutes.
Or, you can disconnect using Telnet.
This test tells you that you can connect over the port.
If Telnet reports that you cannot connect, there are several
possible reasons:
- If you can connect by replacing "tserv" with the Terminal Server's
IP address but not the host name, you may have a DNS or WINS resolution
problem.
- If you can connect when "tserv" is the host name, but cannot connect
when "tserv" is the computer name, then you may have a NetBIOS name
resolution issue with WINS or an LMHOSTS file.
- If you cannot connect when "tserv" is the IP address, the host name,
or the computer name, then it is likely that port 3389 is blocked
somewhere in your WAN.