Terminal Server Error Messages: 3900 to 7999 (186548)



The information in this article applies to:

  • Microsoft Windows NT Server 4.0 Terminal Server Edition

This article was previously published under Q186548

SUMMARY

This article describes Terminal Server error messages 3900 to 7999.

MORE INFORMATION

Error 3900

Message from *** to *** on ***

Error 3902

**** unexpected end of message ****

Error 3905

Press ESC to exit

Error 3910

Current time at *** is ***

Error 3911

The current local clock is *** Do you want to set the local computer's time to match the time at ***? ***:

Error 3912

Could not locate a time-server.

Error 3913

Could not find the domain controller for domain ***.
Explanation: Either this domain does not have logon security and therefore does not have a domain controller, or its domain controller is unavailable.

Action: If this domain does not have logon security, you cannot use this command. Otherwise, retry the command. If the problem persists, ask your network administrator if the domain controller is running.

Error 3915

The user's home directory could not be determined.
Explanation: The system could not determine your home directory.

Action: Ask your network administrator to add a home directory for you.

Error 3916

The user's home directory has not been specified.
Explanation: The system could not determine your home directory.

Action: Ask your network administrator to add a home directory for you.

Error 3917

The name specified for the user's home directory (***) is not a universal naming convention (UNC) name.
Explanation: Your home directory is not a network path that can be connected to. The directory must specify a full path, including the server and share names.

Action: Ask your network administrator to verify that the home directory path specified in the user account is correct.

Error 3918

Drive *** is now connected to ***. Your home directory is ***\***.

Error 3919

Drive *** is now connected to ***.

Error 3920

There are no available drive letters left.

Error 3932

*** is not a valid domain or workgroup name.
Explanation: The name you specified is not a valid domain or workgroup name.

Action: Check the spelling of the name. Retype the command with a valid domain or workgroup name.

Error 3951

You specified too many values for the *** option.
Explanation: You specified too many values for the listed option.

Action: Retype the command with the correct number of values. To see the syntax of this command, type:

NET HELP command

Error 3952

You entered an invalid value for the *** option.
Explanation: You typed an invalid value for the listed option.

Action: Retype the command with valid values. To see the syntax of this command, type:

NET HELP command

Error 3953

The syntax is incorrect.
Explanation: You did not use the correct syntax of this command.

Action: To see the syntax of this command, type:

NET HELP command

Error 3960

You specified an invalid file number.
Explanation: The file identification number you specified is either outside the valid range or is nonnumeric.

Action: Retype the command with a valid file identification number. To see a list of the server's open files and their identification numbers, type:

NET FILE

Error 3961

You specified an invalid print job number.
Explanation: The print job identification number you specified is either outside the valid range or is nonnumeric.

Action: Retype the command with a valid print job identification number. To see a list of a server's print jobs, type:

NET PRINT \\computername\sharename

Error 3963

The user or group account specified cannot be found.
Explanation: The user or group account you typed does not exist.

Action: Retype the command, specifying an existing account.

Error 3965

The user was added but could not be enabled for File and Print Services for NetWare.

Error 3966

File and Print Services for NetWare is not installed.

Error 3967

Cannot set user properties for File and Print Services for NetWare.

Error 3968

Password for *** is: ***

Error 3969

NetWare compatible logon

Error 5001

The cluster resource cannot be moved to another group because other resources are dependent on it.

Error 5002

The cluster resource dependency cannot be found.

Error 5003

The cluster resource cannot be made dependent on the specified resource because it is already dependent.

Error 5004

The cluster resource is not online.

Error 5005

A cluster node is not available for this operation.

Error 5006

The cluster resource is not available.

Error 5007

The cluster resource could not be found.

Error 5008

The cluster is being shut down.

Error 5009

A cluster node cannot be evicted from the cluster while it is online.

Error 5010

The object already exists.

Error 5011

The object is already in the list.

Error 5012

The cluster group is not available for any new requests.

Error 5013

The cluster group could not be found.

Error 5014

The operation could not be completed because the cluster group is not online.

Error 5015

The cluster node is not the owner of the resource.

Error 5016

The cluster node is not the owner of the group.

Error 5017

The cluster resource could not be created in the specified resource monitor.

Error 5018

The cluster resource could not be brought online by the resource monitor.

Error 5019

The operation could not be completed because the cluster resource is online.

Error 5020

The cluster resource could not be deleted or brought offline because it is the quorum resource.

Error 5021

The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource.

Error 5022

The cluster software is shutting down.

Error 5023

The group or resource is not in the correct state to perform the requested operation.

Error 5024

The properties were stored but not all changes will take effect until the next time the resource is brought online.

Error 5025

The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.

Error 5026

The cluster resource could not be deleted since it is a core resource.

Error 5027

The quorum resource failed to come online.

Error 5028

The quorum log could not be created or mounted successfully.

Error 5029

The cluster log is corrupt.

Error 5030

The record could not be written to the cluster log since it exceeds the maximum size.

Error 5031

The cluster log exceeds its maximum size.

Error 5032

No checkpoint record was found in the cluster log.

Error 5033

The minimum required disk space needed for logging is not available.

Error 6118

The list of servers for this workgroup is not currently available

Error 7001

The specified session name is invalid.

Error 7002

The specified protocol driver is invalid.

Error 7003

The specified protocol driver was not found in the system path.

Error 7004

The specified Terminal Connection driver was not found in the system path.

Error 7005

A Registry key could not be created in the Event Log for this session.

Error 7006

A service with the same name already exists on the system.

Error 7007

A close operation is pending on the session.

Error 7008

There are no free output buffers available.

Error 7009

The MODEM.INF file was not found.

Error 7010

The modem name was not found in MODEM.INF.

Error 7011

The modem did not accept the command sent to it. Verify the configured modem name matches the attached modem.

Error 7012

The modem did not respond to the command sent to it. Verify the modem is properly cabled and powered on.

Error 7013

Carrier detect has failed or carrier has been dropped due to disconnect.

Error 7014

Dial tone not detected within required time. Verify phone cable is properly attached and functional.

Error 7015

Busy signal detected at remote site on callback.

Error 7016

Voice detected at remote site on callback.

Error 7017

Transport driver error

Error 7018

This program cannot be run in text mode.

Error 7019

The system has reached its licensed logon limit. Please try again later.

Error 7020

The Terminal Connection you are using is not licensed to use this system. Your logon request is denied.

Error 7021

The system license has expired. Your logon request is denied.

Error 7022

The specified session cannot be found.

Error 7023

The specified session name is already in use.

Error 7024

The requested operation cannot be completed because the Terminal Connection is currently busy processing a connect, disconnect, reset, or delete operation.

Error 7025

An attempt has been made to connect to a session whose video mode is not supported by the current client.

Error 7026

The license diskette has been installed the maximum number of times. Either remove it from another system or purchase another license diskette.

Error 7027

The license diskette had an error while installing. Please contact the supplier for further information.

Error 7028

The license has already been installed on this system. It cannot be installed more than once on a given system.

Error 7029

The license diskette has already been removed the maximum number of times.

Error 7030

The license diskette had an error while removing. Please contact the supplier for further information.

Error 7031

A Base license is already installed on this machine. Only one Base license can be installed at a time.

Error 7032

A Base license is not installed on this machine. A Base license must be installed before any other licenses can be installed.

Error 7033

The Base license cannot be removed while other licenses are installed. Please remove all other licenses first.

Error 7034

The license cannot be installed because it does not match the Base license OEM ID. Please obtain the correct OEM license to install.

Error 7035

The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.

Error 7036

The license diskette does not match the license selected for removal. Please verify that the desired license diskette is in the drive.

Error 7037

Your interactive logon privilege has been disabled. Please contact your administrator.

Error 7038

The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access.

Error 7039

No diskette is in the selected drive or the diskette structure is corrupt and non-readable. Please verify that a valid license diskette is in the drive.

Error 7040

The client failed to respond to the server connect message.

Error 7041

Disconnecting the console session is not supported.

Error 7042

Reconnecting a disconnected session to the console is not supported.

Error 7043

The license password is incorrect.

Error 7044

The request to shadow another session was denied.

Error 7045

The requested session access is denied.

Error 7046

The requested service or operation cannot be started. A license is required to enable the requested service or operation. Please contact your supplier for further information.

Error 7047

The Domain Controller has been configured, but cannot be started. A license is required to enable the Domain Controller. Please contact your supplier for further information.

Error 7048

The license has an incompatible version number.

Error 7049

The specified Terminal Connection driver is invalid.

Error 7050

The requested session cannot be shadowed. This may be because the session is disconnected or does not currently have a user logged on. Also, you cannot shadow a session from the system console or shadow the system console.

Error 7051

The requested session is not configured to allow shadowing.

Error 7052

Your request to connect to this WinFrame server has been rejected. Your WinFrame Client license number is currently being used by another user. Please call your system administrator to obtain a new copy of the WinFrame Client with a valid, unique license number. Click OK to continue.

Error 7053

Your request to connect to this WinFrame server has been rejected. Your WinFrame Client license number has not been entered for this copy of the WinFrame Client. Please call your system administrator for help in entering a valid, unique license number for this WinFrame Client. Click OK to continue.

Error 7054

Logon failed. The NetWare password is valid, however an error occurred when attempting to update your password on this domain. Click OK to continue.

Error 7055

The default administrator for NetWare logons is not configured correctly for this domain. Notify your system administrator. Click OK to continue.

Error 7056

Required licenses have already been installed. The update license is not required.

Error 7057

The upgrade license is for a different WinFrame product. WinFrame upgrades are product specific and can only be applied to the same WinFrame product.

Error 7058

The required licenses are not installed. Either a WinFrame Base license or WinFrame Upgrade license needs to be installed to allow more than one logon.

Error 7059

The serial number is invalid. A valid serial number must be provided in order to obtain a License Number and continue with the registration process.

Error 7060

The product SKU field of the serial number is invalid. The product SKU database does not contain an entry for the given SKU.

Error 7061

The license number is invalid. A valid License Number must be provided in order to continue with the registration process.

Error 7062

The Activation Code is invalid. A valid Activation Code must be provided in order to complete the registration process.

Error 7063

The license is not configured for pooling. Please contact the supplier for further information.

Error 7064

The pool count for a license cannot exceed the user count or be less than 0.

Error 7065

An error occurred while setting the pool count. Please contact the supplier for further information.

Error 7066

The configuration Registry has been tampered with or corrupted in the license area. You must re-install your licenses. Notify your system administrator.

Error 7067

The configuration Registry has been tampered with or corrupted in the license area and is missing values. You must re-install your licenses. Notify your system administrator.

Error 7068

Security identifiers for the license area of the configuration Registry could not be created. You must re-install your licenses. Notify your system administrator.

Error 7069

Security identifiers for the license area of the configuration Registry could not be written. You must re-install your licenses. Notify your system administrator.

Modification Type:MinorLast Reviewed:7/16/2004
Keywords:kbinfo KB186548