MORE INFORMATION
Error 3301
Remote IPC
Error 3302
Remote Admin
Error 3303
Logon server share
Error 3304
A network error occurred.
Error 3400
There is not enough memory to start the Workstation service.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. The
computer does not have enough memory available to start the Workstation
service.
Action: Stop other applications that are running on the computer, and then
start the Workstation service again.
Error 3401
An error occurred when reading the NETWORKS entry in the LANMAN.INI
file.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. LAN
Manager could not read the entries in the [networks] section of the
LANMAN.INI file.
Action: Be sure that the Lanman.ini file exists (in the LANMAN directory).
Check the format of the entries in the [networks] section.
Error 3402
This is an invalid argument: ***.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. The
listed variable or option (from an entry in the [networks] section of the
Lanman.ini file) is invalid.
Action: Check the format of the entries in the [networks] section of the
Lanman.ini file.
Error 3403
The *** NETWORKS entry in the LANMAN.INI file has a syntax error and
will be ignored.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. The
listed entry in the [networks] section of the Lanman.ini file has a syntax
error.
Action: Check the format of the listed entry.
Error 3404
There are too many NETWORKS entries in the LANMAN.INI file.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. The
Lanman.ini file cannot have more than 12 entries in the [networks] section.
Action: Remove entries from the [networks] section until 12 or fewer
remain.
Error 3406
An error occurred when opening network device driver *** = ***.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. The
listed device driver could not be installed.
Action: Check that the listed entry in the [networks] section of the
Lanman.ini file is valid. In the Config.sys file, check the DEVICE entry
that loads this device driver -- the parameters of that entry may not be
correct. Also check that the DEVICE entry specifies the correct path of the
device driver.
Error 3407
Device driver *** sent a bad BiosLinkage response.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. The
device driver specified is incorrect. It may be incompatible with the
network adapter card, or it may be out-of-date.
Action: Use a different device driver.
Error 3408
The program cannot be used with this operating system.
Explanation: Your computer has an incorrect version of the operating
system.
Action: Upgrade your computer to the latest version of Windows NT.
Error 3409
The redirector is already installed.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. The
redirector is already installed.
Action: No action is needed.
Error 3410
Installing NETWKSTA.SYS Version ***.***.*** (***)
Error 3411
There was an error installing NETWKSTA.SYS. Press ENTER to continue.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. The LAN
Manager device driver Netwksta.sys could not be installed.
Action: Another error message that contains a more detailed explanation of
the error, should have been displayed prior to this message. See that
message for the cause of the problem.
Error 3412
Resolver linkage problem.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. An
internal error occurred.
Action: Contact technical support.
Error 3413
Your logon time at *** ends at ***. Please clean up and log off.
Error 3414
You will be automatically disconnected at ***.
Error 3415
Your logon time at *** has ended.
Error 3416
Your logon time at *** ended at ***.
Error 3417
WARNING: You have until *** to logoff. If you have not logged off at
this time, your session will be disconnected, and any open files or
devices you have open may lose data.
Error 3418
WARNING: You must log off at *** now. You have two minutes to log off,
or you will be disconnected.
Error 3419
You have open files or devices, and a forced disconnection may cause you
to lose data.
Error 3420
Default Share for Internal Use
Error 3421
Messenger Service
Error 3500
The command completed successfully.
Error 3501
You used an invalid option.
Explanation: You typed an invalid command option.
Action: To see a list of options for this command, type:
NOTE: When typing commands, remember that most options must be preceded
with a slash, as in /DELETE.
Error 3502
System error *** has occurred.
Explanation: The specified system error occurred.
Action: Correct the problem and retype the command.
Error 3503
The command contains an invalid number of arguments.
Explanation: The command has an invalid number of options or variables.
Action: To see the syntax of this command, type:
Error 3504
The command completed with one or more errors.
Explanation: The command tried to perform multiple tasks and some of them
could not be completed.
Action: No action is needed.
Error 3505
You used an option with an invalid value.
Explanation: You typed an incorrect value for a command option.
Action: To see the syntax of this command and its options, type:
NET HELP command /OPTIONS
Error 3506
The option *** is unknown.
Explanation: The specified option is invalid.
Action: Check the spelling of the option you typed. To see a list of
options for this command, type:
Error 3507
Option *** is ambiguous.
Explanation: The specified option can be confused with other options.
Action: Type enough letters of the option so that it is unambiguous. If the
command has two options that both begin with /OPT, such as /OPT and
/OPTION, you must type at least four letters to designate the second
option. To see a list of options for this command, type:
Error 3510
A command was used with conflicting switches.
Explanation: You typed a command with two options that conflict, such as
/YES and /NO.
Action: Retype the command without contradictory options.
Error 3511
Could not find subprogram ***.
Explanation: The specified program file could not be found.
Action: Check that the program is in the same directory as NET.EXE, which
is usually in your system directory.
Error 3512
The software requires a newer version of the operating system.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. The
software you are attempting to run requires a more recent version of the
operating system.
Action: Run the software using a more recent version of the operating
system.
Error 3513
More data is available than can be returned by Windows NT.
Explanation: Windows NT could not display all available data.
Action: The action required depends on the command that returned the error.
Contact your network administrator.
Error 3514
More help is available by typing NET HELPMSG ***.
Error 3515
This command can be used only on a Windows NT Domain Controller.
Explanation: This command can be used only on a Windows NT Server system.
Action: Redo the operation on a Windows NT Server system.
Error 3520
These Windows NT services are started:
Error 3521
The *** service is not started.
Error 3522
The *** service is starting.
Error 3523
The *** service could not be started.
Error 3524
The *** service was started successfully.
Error 3525
Stopping the Workstation service also stops the Server service.
Error 3526
The workstation has open files.
Error 3527
The *** service is stopping.
Error 3528
The *** service could not be stopped.
Error 3529
The *** service was stopped successfully.
Error 3530
The following services are dependent on the *** service. Stopping the
*** service will also stop these services.
Error 3533
The service is starting or stopping. Please try again later.
Explanation: This task cannot be performed while the service is starting or stopping.
Action: Try the task later.
Error 3534
The service did not report an error.
Explanation: The service did not report an error.
Action: Try the task later. If the problem persists, contact your network
administrator.
Error 3535
An error occurred controlling the device.
Error 3536
The *** service was continued successfully.
Error 3537
The *** service was paused successfully.
Error 3538
The *** service failed to resume.
Error 3539
The *** service failed to pause.
Error 3540
The *** service continue is pending
Error 3541
The *** service pause is pending.
Error 3542
*** was continued successfully.
Error 3543
*** was paused successfully.
Error 3544
The *** service has been started by another process and is pending.
Error 3547
A service specific error occurred: ***.
Explanation: A service-specific error occurred.
Action: Refer to the Help or documentation for that service to determine
the problem.
Error 3660
These workstations have sessions on this server:
Error 3661
These workstations have sessions with open files on this server:
Error 3666
The message alias is forwarded.
Error 3670
You have these remote connections:
Error 3671
Continuing will cancel the connections.
Error 3675
The session from *** has open files.
Error 3676
New connections will be remembered.
Error 3677
New connections will not be remembered.
Error 3678
An error occurred while saving your profile. The state of your
remembered connections has not changed.
Error 3679
An error occurred while reading your profile.
Error 3680
An error occurred while restoring the connection to ***.
Error 3682
No network services are started.
Error 3683
There are no entries in the list.
Error 3688
Users have open files on ***. Continuing the operation will force the
files closed.
Error 3689
The Workstation service is already running. Windows NT will ignore
command options for the workstation.
Error 3691
There are open files and/or incomplete directory searches pending on the
connection to ***.
Error 3693
The request will be processed at the primary domain controller for
domain ***.
Error 3694
The shared queue cannot be deleted while a print job is being spooled to
the queue.
Explanation: This message should occur only on a down-level computer. Any
action to correct the problem should be performed on that computer. You
attempted to delete an active printer.
Action: After the current job has finished spooling, either print or delete
the job. Then delete the printer.
Error 3695
*** has a remembered connection to ***.