RAS Error 718 When Using Motorola ISDN BitSURFR Pro EZ (181546)


The information in this article applies to:

  • Microsoft Windows NT Workstation 4.0
  • Microsoft Windows NT Server 4.0
This article was previously published under Q181546

SYMPTOMS

When you dial from a computer running Windows NT and using the Motorola ISDN BitSURFR Pro EZ in a Windows NT Remote Access Service (RAS) server, you may receive the following error message:

Error 718 - Timeout while waiting for valid response from remote peer

RESOLUTION

To resolve this issue, you will need to modify the initialization string being sent to the BitSURFR Pro EZ. Use the following steps:

  1. Click Start, point to Settings, and click Control Panel.
  2. Double-click Modems, select BitSURFR Pro EZ ISDN, and click Properties.
  3. Click the Connection tab and click Advanced.
  4. In the Extra settings field, type the following:

    AT%A2=95@M2=M
  5. In the Advanced Connection Settings dialog box, click OK.
  6. In the BitSURFR Pro EZ ISDN Properties dialog box, click OK.
  7. In the Modems Properties dialog box, click Close.


The Motorola ISDN BitSURFR Pro EZ modem is manufactured by Motorola, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

For information about how to contact Motorola, query in the Knowledge Base for one of the following articles:

ARTICLE-ID: 65416
TITLE : Hardware and Software Third-Party Vendor Contact List, A-K

ARTICLE-ID: 60781
TITLE : Hardware and Software Third-Party Vendor Contact List, L-P

ARTICLE-ID: 60782
TITLE : Hardware and Software Third-Party Vendor Contact List, Q-Z

Modification Type:MajorLast Reviewed:8/9/2001
Keywords:kb3rdparty kberrmsg kbnetwork kbprb KB181546
©2002 Microsoft Corporation. All rights reserved.