SNAPRINT Ignores SCS Codes, Print Job Ignores SCS Formatting (181030)
The information in this article applies to:
- Microsoft SNA Server 3.0 SP2
- Microsoft SNA Server 4.0
This article was previously published under Q181030 SYMPTOMS
Print Server may not honor SCS codes if you have selected the No Line
Formatting option for 3270 print sessions. The SCS code(s) are ignored by
the print service, and this causes the print job to ignore SCS formatting
and command execution.
In one reported case, Carriage Returns (0x0D) were ignored when they were
followed by certain combinations of other control codes and 3270 print
sessions were configured for No Line Formatting.
CAUSE
The Print service was written to ignore SCS codes if No Line Formatting is
selected.
STATUS
Microsoft has confirmed this to be a problem in SNA Server versions 3.0 SP2
and 4.0.
This problem was corrected in the latest SNA Server versions 3.0 and 4.0
U.S. Service Packs. For information on obtaining these Service Packs,
query on the following word in the Microsoft Knowledge Base (without the
spaces):
| Modification Type: | Major | Last Reviewed: | 3/5/2004 |
|---|
| Keywords: | kbbug kbfix kbprint KB181030 |
|---|
|