Print Server Logs Event 4103 as a Stop Event (180792)
The information in this article applies to:
- Microsoft SNA Server 3.0
- Microsoft SNA Server 3.0 SP1
- Microsoft SNA Server 3.0 SP2
- Microsoft SNA Server 4.0
This article was previously published under Q180792 SYMPTOMS
The SNA Print service may log the following events in the Windows NT Event
Viewer Application log when it receives control codes from an AS/400 that
it does not support:
Event ID: 4103
Source: PPV5250
Description: The print server does not support the control code 0xC8
(Set Graphic Error Action).
Event ID: 4103
Source: PPV5250
Description: The print server does not support the control code 0xD1
(Set Graphic Character Set).
These events are logged as Stop events by the print service, even though
they are not an indication of a serious problem. The print service simply
ignores these control codes if they are contained in an AS/400 print job.
CAUSE
Event ID 4103 is being logged as a serious stop error rather than a lower
priority informational event.
STATUS
Microsoft has confirmed this to be a problem in SNA Server versions 3.0,
3.0 SP1, 3.0 SP2, and 4.0.
This problem was corrected in the latest SNA Server versions 3.0 and 4.0
U.S. Service Packs. For information on obtaining these Service Packs,
query on the following word in the Microsoft Knowledge Base (without the
spaces):
MORE INFORMATION
Event 4103 has been modified to give additional information to assist in
troubleshooting.
| Modification Type: | Major | Last Reviewed: | 6/24/2004 |
|---|
| Keywords: | kbbug kbfix KB180792 |
|---|
|