Changes Remain After You Click Cancel in Network Properties (179231)
The information in this article applies to:
- Microsoft Windows 98
- Microsoft Windows 95
This article was previously published under Q179231 If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware: SYMPTOMS
If you change your domain in the properties for the Client for Microsoft
Networks network client or change your preferred server in the properties
for the Client for NetWare Networks network client, click OK, and then
click Cancel, your changes remain in effect.
This behavior can occur if you have either an Intel EtherExpress 16 or
Intel EtherExpress Pro 10 network adapter and the following network
protocols installed: Network Basic Input/Output System Enhanced User
Interface (NetBEUI), Internetworking Packet Exchange/Session Packet
Exchange (IPX/SPX), and Transmission Control Protocol/Internet Protocol
(TCP/IP).
RESOLUTION
To work around this behavior, type your original domain or preferred
server information in the properties for the network client, click OK,
and then click OK.
STATUS
Microsoft is researching this problem and will post new information here
in the Microsoft Knowledge Base as it becomes available.
Modification Type: | Major | Last Reviewed: | 7/13/2006 |
---|
Keywords: | kbenv kbnetwork kbprb KB179231 |
---|
|