3Com Tokenlink Velocity Network Adapter Not Detected Correctly (177858)

The information in this article applies to:

Microsoft Windows 98

This article was previously published under Q177858

If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware:

http://support.microsoft.com/default.aspx/w98?sid=460

SYMPTOMS

When you are using a 3Com Tokenlink Velocity Plug and Play (3c319) network adapter, it may be detected as an IBM Token Ring (all types) network adapter.

CAUSE

This behavior can occur when the 3Com Tokenlink Velocity network adapter is in ISA/EISA (non-Plug and Play) mode.

RESOLUTION

To resolve this issue, use this network adapter in Plug and Play mode only. For information about how to set this network adapter to Plug and Play mode, please contact 3Com Corporation.

MORE INFORMATION

This behavior occurs regardless of whether the network adapter is in 3Com mode or IBM mode. Even if the 3Com Tokenlink Velocity network adapter is detected correctly, it may not work properly in ISA/EISA mode. Manually installing the 3c319 driver does not work.

The IBM Token Ring (all types) network adapter driver uses the following resources that cannot be modified:

   Resource           Value
   ------------------------
   I/O port address   A240
   Interrupt          IRQ9

Modification Type:	Major	Last Reviewed:	7/13/2006
Keywords:	kbprb KB177858