Cannot Configure the Odometer Feature in IntelliPoint (177553)


The information in this article applies to:

  • Microsoft IntelliPoint software 2.1
This article was previously published under Q177553

SYMPTOMS

When you change the configuration of the Odometer feature in the Mouse Properties dialog box, the configuration you specify may have no effect.

CAUSE

This issue can occur if you change the configuration and you then try to change the configuration again.

WORKAROUND

To work around this issue, restart your computer, and then change the Odometer configuration. To do so, use the following steps:

  1. Click Start, click Shut Down, click Restart (or Restart The Computer), and then click OK (or Yes).
  2. Click Start, point to Settings, and then click Control Panel.
  3. Double-click Mouse.
  4. On the Productivity tab, click the Turn On The Odometer check box to clear it if it is already selected, or to select it if it is already cleared.
  5. Click OK, and then close Control Panel.
Modification Type:MajorLast Reviewed:1/26/2003
Keywords:KB177553
©2002 Microsoft Corporation. All rights reserved.