Stop 0x7F Caused by DigiBoard Driver (175787)


The information in this article applies to:

  • Microsoft Windows NT Server 4.0
This article was previously published under Q175787

SYMPTOMS

A computer running Windows NT 4.0 Server with a DigiBoard version 2.1.0 installed may Blue Screen with the following error.

Stop 0x0000007F(0x00000008, 0x00000000, 0x00000000, 0x00000000)


NOTE: The first parameter will always be 0x0000008 (Double Fault)

CAUSE

The driver has caused the thread's memory stack to overrun, causing the Stop 0x7f error. The driver for the DigiBoard version 2.1.0 is named Digifep5.sys, located in the %SystemRoot%\System32\Drivers directory.

RESOLUTION

The driver should be updated with the Digifep5.sys that comes with Windows NT 4.0, or go to Digiboard's FTP site for the latest driver.

The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
Modification Type:MajorLast Reviewed:12/12/2002
Keywords:kbprb KB175787
©2002 Microsoft Corporation. All rights reserved.