XCON: How to Configure Dynamic RAS Using IPX (170252)
The information in this article applies to:
- Microsoft Exchange Server 5.5
- Microsoft Exchange Server 4.0
- Microsoft Exchange Server 5.0
This article was previously published under Q170252 SUMMARY
The Microsoft Exchange Dynamic RAS connector can be configured to use IPX
but there are a few details that must be configured for it to work
properly.
MORE INFORMATION
If there are no Novell Netware servers on the LAN segment, it will be
necessary to specify the Internal Network number for the IPX protocol in
the Protocol section of Control Panel. The valid range is 0x1 thru
0xffffffff. In addition, in the RAS service, select the Network
configuration and configure IPX to Allocate Network Numbers and specify the
network number. Ensure that the internal network and network numbers are
unique within your network. All other settings may be left at the default.
Also, add the NetBeui protocol to provide netbios name resolution. This
configuration was tested with RAS and the RAS function of Routing and
Remote Access Update for Windows NT 4.0.
| Modification Type: | Minor | Last Reviewed: | 4/28/2005 |
|---|
| Keywords: | kbsetup kbtshoot KB170252 |
|---|
|