SUMMARY
There are times when it may become necessary to enable advanced logging on
the Microsoft Exchange Message Transfer Agent (MTA) in order to diagnose a
problem. This is in addition to the logging provided in the Windows NT
application log.
The logs must be removed from the MTADATA directory prior to restarting the MTA or they will be reset to zero and no information will be saved.
To enable the advanced logging, start the Windows NT Registry Editor and go
to the following key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeMTA
\Parameters
Find Text Event Log and set it to 1 (the default is 0).
Add the following DWORD values, entering the names EXACTLY as shown:
Unbounded Event Log
Unbounded APDU Log
Unbounded Interop Log
These write to the Ev0.log, Bf0.log, and Ap0.log files, respectively.
To enable the logging operation, start the Microsoft Exchange Administrator
program, open the MTA Properties page, click the Diagnostics Logging tab,
and set the desired logging level on the categories in question.
During normal operation, the value for the above 3 entries should be 0.
However, when a problem arises, setting any one or all of these to 1, along
with setting the Text Event Log to 1, will start writing the logs to the
Exchsrvr\mtadata directory.