WD97: Drawing Object/AutoShape Fill Pattern Appear as Shading (167962)



The information in this article applies to:

  • Microsoft Word 97 for Windows

This article was previously published under Q167962

SYMPTOMS

When you print a document that contains a drawing object or an AutoShape filled with a pattern, the pattern is printed smaller than expected and may appear to be shading rather than a pattern.

NOTE: This problem may occur when you print to a PCL or a PostScript printer.

WORKAROUND

Use the following steps to decrease the printer resolution when you print the document:

  1. Open the document containing the filled pattern drawing or AutoShape objects.
  2. On the File menu, click Print.
  3. In the Print dialog box, click Properties.
  4. Click the Graphics tab.
  5. Change the Resolution box to a lower value; for example, change it to 150 dots per inch, and then click OK.
  6. Click OK to close the print dialog box and to print the document.

MORE INFORMATION

For additional information, please see the following articles in the Microsoft Knowledge Base:

159222 OFF97: Output Quality Problems Printing Drawing Objects

81193 Chart or Graph Patterns Print Solid Gray in Word for Windows


Modification Type:MajorLast Reviewed:2/20/2002
Keywords:kbbug kbprint kbusage KB167962