Sony Spressa SCSI CD-ROM Drive May Not Be Detected (164434)


The information in this article applies to:

  • Microsoft Windows NT Server 4.0
  • Microsoft Windows NT Workstation 4.0
This article was previously published under Q164434

SYMPTOMS

Windows NT Setup may not detect the Sony Spressa CDU-920S SCSI CD-ROM drive.

CAUSE

The Sony Spressa CDU-920S is shipped with the Parity, ID1, ID2, and Prevent/Allow settings preset to On. Note that the Parity jumper is also known as the Device Type jumper.

RESOLUTION

Remove the Parity/Device Type jumper. Note also that the firmware version must be 2.0B.

For information about removing jumpers or determining the firmware version, contact Sony Corporation.
Modification Type:MajorLast Reviewed:2/22/2002
Keywords:kbHardware kbsetup KB164434
©2002 Microsoft Corporation. All rights reserved.