OFF97: Setup Error 932 After Modifying STF File (162796)


The information in this article applies to:

  • Microsoft Office 97 for Windows
  • Microsoft Office 97 Professional Edition for Windows
  • Microsoft Office 97 Standard Edition for Windows
  • Microsoft Office 97 Small Business Edition for Windows
  • Microsoft Office 97 Small Business Edition for Windows, version 2.0
This article was previously published under Q162796

SYMPTOMS

When you run the Microsoft Office 97 Setup program, you may receive the following error message multiple times:
Setup Error 932
Object 6632
Your Setup files may be damaged. Try restarting the Setup program from where you originally ran it.
Each time the error message is displayed, the Object value changes to one of the following: 
   6632   6633   6634   8107   8108   8109   8110   8111   8112   8113
   8114   8115   8116   11814

Finally, you receive the error message:
Microsoft Office 97 Setup was not completed successfully.

CAUSE

This problem will occur if Microsoft Office 97 Setup is using a setup table (.stf) file that was opened, edited, and saved improperly in Microsoft Excel. Note that it does not matter what version of Microsoft Excel you use to modify the .stf file; the problem has to do with the .stf file itself.

For example, if you open Custom.stf in Microsoft Excel, make changes to it, and save it, you may receive these error messages when you use Custom.stf with Microsoft Office 97 Setup.

WORKAROUND

To prevent this problem from occurring, you must perform extra steps. Please review both methods completely before you open the file in Excel.

Method 1

To use this method, follow these steps:
  1. Open the .stf file. You can open the .stf file by using the steps in the following article in the Microsoft Knowledge Base:

    178330 How to install Access 97 wizards locally [Standalone network setup]

  2. After the .stf file is open, press CTRL+SHIFT+SPACEBAR to select the entire .stf file. Then, on the Data menu, point to Filter, and click AutoFilter.
  3. In cell E1, click the arrow, and then click the value "AddRegData."
  4. In cell F1, click the arrow and click Custom. In the Custom AutoFilter dialog box, set the following values 
          Show rows where: F contains """" (four quotation marks)

    and click OK.
  5. Select all visible cells in column F.
  6. On the Edit menu, click Replace. In the Find What box, type a space, followed by a quotation mark ( "). In the Replace With box, type a quotation mark ("). Click Replace All.
  7. Select all visible cells in column F.
  8. On the Edit menu, click Replace. In the Find What box, type three quotation marks ("""). In the Replace With box, type two quotation marks (""). Click Replace All.
  9. Select all visible cells in column F.
  10. On the Edit menu, click Replace. In the Find What box, type two quotation marks (""). In the Replace With box, type a quotation mark ("). Click Replace All.
  11. On the Data menu, point to Filter, and click AutoFilter.
You can now make any changes you want to the .stf file. When you are done, be sure you save the .stf file as a tab-delimited text file by using the instructions in Microsoft Knowledge Base article mentioned in step 1.

If you have already made changes to your .stf file and are receiving the error messages in the "Symptoms" section, you can repair your .stf file by following the steps in the "Workaround" section.

Method 2


NOTE: Steps 1 through 10 have to be done only one time. If you want to make changes to the .stf file after using this method once, you can start with step 11.

To use this method, follow these steps:
  1. Make a backup copy of the original .stf file.
  2. Open the document in Microsoft Word.
  3. On the Edit menu, click Replace.

    Replace "^t " (Notice the space after the t).
    With "^t"

    NOTE: Do not type quotation marks.

    Click Replace All. Click Close.

    NOTE: ^t^w does not work because it replaces <tab><tab>, as well as <tab><space>. You want to replace only <tab><space>, so typing ^t<spacebar> on the Replace line and just ^t on the With line produces the results you want.
  4. On the File menu, click Save As. In the Save as type box select Text Only (*.txt). The File name box should contain either:

    Off97Pro.stf.txt for the Office 97 Professional Edition

    -or-

    Off97Std.stf.txt for the Office 97 Standard Edition

    Click Save.
  5. Quit Microsoft Word.
  6. Click the Start button, point to Programs, and then click Windows Explorer.
  7. On the View menu, click Options, and then click the View tab.
  8. If there is a check in the "Hide file extensions for known file types" check box, click to clear the box. Click OK.
  9. Go to the folder in which the .stf file was saved.
  10. Select the .stf file. On the File menu, click Rename.Delete the .txt portion of the file name so that it looks like the following:

    Off97Pro.stf for the Office 97 Professional Edition

    -or-

    Off97Std.stf for the Office 97 Standard Edition
  11. In Microsoft Excel, open the .stf file you want to edit.
  12. In the Text Import Wizard dialog box, click Next twice to proceed to the step 3 of the wizard.
  13. In the "Text Import Wizard - Step 3 of 3" dialog box, under Data Preview, drag the vertical scrollbar all the way down and drag the horizontal scrollbar all the way to the right. Hold the SHIFT key down, and then click the last column. All of the columns should be selected.
  14. Under Column Data Format, click the Text option, and click Finish.

STATUS

Microsoft has confirmed this to be a problem in the Microsoft products listed at the beginning of this article. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

MORE INFORMATION

When you open an .stf in Microsoft Excel, the Text Import Wizard helps you convert the file (a very large text file) into a format that Microsoft Excel can display.

The steps used to open an .stf in an earlier version of Microsoft Office must be altered slightly to work correctly with the setup table files for Microsoft Office 97. Because of this, using the incorrect steps to open, edit, and save the setup table file results in a corrupted setup table file, and you receive the error messages in the "Symptoms" section of this article when you run Microsoft Office 97 Setup.
Modification Type:MajorLast Reviewed:3/3/2006
Keywords:KB162796
©2004 Microsoft Corporation. All rights reserved.