STOP 0x0000001e Installing IBM PeerMaster MCA Adapter (162419)


The information in this article applies to:

  • Microsoft Windows NT Workstation 4.0
  • Microsoft Windows NT Server 4.0
This article was previously published under Q162419

SYMPTOMS

During the networking portion of setup Windows NT Server traps with the following information:
*** STOP: 0X0000001E (0XC0000005, 0XFF0D5928, 0X00000000, 0X0000005C)
KMODE_EXCEPTION_NOT_HANDLED*** Address ff0d5928 has base at ff0ce000 - NDIS.SYS
NOTE: The parameters in parentheses will be the same every time.

CAUSE

The Quadenet.sys driver is passing a null pointer to the Ndis.sys driver. This trap also occurs when the IBM PeerMaster MCA adapter is added to computers with Windows NT 4.0 already installed.

STATUS

Microsoft has confirmed this to be a problem in Windows NT version 4.0. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
Modification Type:MajorLast Reviewed:8/9/2001
Keywords:kbnetwork KB162419
©2002 Microsoft Corporation. All rights reserved.